AT91SAM9260B-CU-999 Atmel, AT91SAM9260B-CU-999 Datasheet - Page 780

• Manufacturer Part Number: AT91SAM9260B-CU-999
• Description: IC MCU ARM9 217LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9260B-CU-999

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: POR, WDT
• Number Of I /o: 96
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 217-LFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: 2-Wire, EBI, I2S, SPI, USART
• Maximum Clock Frequency: 180 MHz
• Number Of Programmable I/os: 96
• Number Of Timers: 6
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9260-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 4 Channel
• For Use With: AT91SAM9260-EK - KIT EVAL FOR AT91SAM9260AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

780
Revision
6221H
AT91SAM9260
Comments
- Features shortened and reorganized, from new structure in Datasheet AT91SAM9G45
-
- Information from sections 7.1 to 7.4 moved to sections 11.2, 19.2, 24.2 and 12.2, with ‘Embedded
Characteristics’ header
- Information from sections 9.2 to 9.4, 9.6 to 9.8 and 9.10 to 9.11to 7.4 moved to sections 13.2, 18.2, 25.2,
17.2, 16.2, 15.2, 27.2 and 28.2, with ‘Embedded Characteristics’ header
- Information from sections 10.4.1 to 10.4.11 moved to sections 30.2 to 35.2, 38.2, 37.2, 36.2, 39.2 and 4.2,
with ‘Embedded Characteristics’ header
- Sections 41.5.3 and 41.5.4 moved after
Section 42. ”AT91SAM9260 Ordering
Table 9-3, “Multiplexing on PIO Controller
Table 3-1, “Signal Description
AT91SAM9260 Boot Program
Figure 13-2 ”Clocks and DBGU
Section 18.6 ”Bus Matrix User Interface”
Table 18-4, “Register
Section 18.6.1 ”Bus Matrix Master Configuration
Table 17.7, “Shutdown Controller (SHDWC) User Interface”
Section 40. ”AT91SAM9260 Electrical Characteristics”
Table 40-11, “Main Oscillator
Figure 40-7 ”SPI Master Mode with (CPO =0 and NCPHA =1) or (CPOL =1 and NCPHA=
Figure 40-8 ”SPI Master Mode with (CPOL= NCPHA=0) or
Figure 40-13 ”USB Data Signal Rise and Fall
Section 43.2 ”AT91SAM9260 Errata - Revision “A” Parts”
Section 43.2.3 ”Bus
Section 43.2.10.3 ”SPI: PDC Data
Section 43.2.5 ”I/O
Section 43.2.5.1 ”I/O High Drive
Section 43.3 ”AT91SAM9260 Errata - Revision “B” Parts”
Section 43.3.2 ”Bus
Section 43.3.4 ”I/O Considerations”
Section 43.3.4.1 ”I/O High Drive
Section 43.3.9 ”Serial Synchronous Controller
Section 8.5 “Backup Section” on page 24
Considerations”, was formerly SMC errata
Matrix”, added to errata.
Matrix”,
Mapping”; MATRIX_MCFG0 reset is 0x2, MATRIX_MCFG5 is Read-only.
Characteristics”, C
List”, Reset/Test, BMS line, added comments.
Configurations”, flow chart replaced.
Strength”, was formerly listed under SMC errata
Strength”, was formerly listed under SMC errata.
Loss”, added to errata.
was formerly SMC errata.
Information”, Ordering codes updated for revision B of the device.
Section 40.6.4 “Crystal Characteristics” on page 732
B”, PB31 line, removed ISI_MCK.
added
Times”, R
(SSC)”, added to errata
LEXT
Registers”, added note, “MATRIX_MCFG5 is write only....”
typ values updated and typo fixed in Unit column.
EXT
= 27 ohms.
(CPOL=NCPHA=1)”, title fixed.
SHDW_MR address is 0x0000_0303
0)”, title fixed.
6221I–ATARM–17-Jul-09
Change
Request
Ref
RFO
5686
5330
5422
5441
5489
5703
5331
5261
rfo
5328
5548
rfo
5548
5598