PIC18F45J50-I/PT Microchip Technology, PIC18F45J50-I/PT Datasheet - Page 11

• Manufacturer Part Number: PIC18F45J50-I/PT
• Description: IC PIC MCU FLASH 32K 2V 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F45J50-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Operating Supply Voltage: 2.25 V to 2.75 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183032, MA180024, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Controller Family/series: PIC18
• No. Of I/o's: 22
• Ram Memory Size: 3776Byte
• Cpu Speed: 48MHz
• No. Of Timers: 5
• Embedded Interface Type: EUSART, I2C, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

1.0
This document contains device-specific information for
the following devices:
This family introduces a new line of low-voltage
Universal Serial Bus (USB) microcontrollers with the
main traditional advantage of all PIC18 microcontrollers,
namely, high computational performance and a rich
feature set at an extremely competitive price point.
These features make the PIC18F46J50 Family a logical
choice for many high-performance applications, where
cost is a primary consideration.
1.1
1.1.1
All of the devices in the PIC18F46J50 Family incorpo-
rate a range of features that can significantly reduce
power consumption during operation. Key features are:
• Alternate Run Modes: By clocking the controller
• Multiple Idle Modes: The controller can also run
• On-the-Fly Mode Switching: The
1.1.2
Devices in the PIC18F46J50 Family incorporate a
fully-featured USB communications module with a
built-in transceiver that is compliant with the USB
Specification Revision 2.0. The module supports both
low-speed and full-speed communication for all
supported data transfer types.
© 2009 Microchip Technology Inc.
• PIC18F24J50
• PIC18F25J50
• PIC18F26J50
• PIC18F44J50
• PIC18F45J50
• PIC18F46J50
from the Timer1 source or the internal RC
oscillator, power consumption during code
execution can be reduced by as much as 90%.
with its CPU core disabled but the peripherals still
active. In these states, power consumption can be
reduced even further, to as little as 4% of normal
operational requirements.
power-managed modes are invoked by user code
during operation, allowing the users to incorporate
power-saving ideas into their application’s
software design.
DEVICE OVERVIEW
Core Features
nanoWatt TECHNOLOGY
UNIVERSAL SERIAL BUS (USB)
• PIC18LF24J50
• PIC18LF25J50
• PIC18LF26J50
• PIC18LF44J50
• PIC18LF45J50
• PIC18LF46J50
PIC18F46J50 FAMILY
1.1.3
All of the devices in the PIC18F46J50 Family offer five
different oscillator options, allowing users a range of
choices in developing application hardware. These
include:
• Two Crystal modes, using crystals or ceramic
• Two External Clock modes, offering the option of
• An internal oscillator block, which provides an
• A Phase Lock Loop (PLL) frequency multiplier,
• Dual clock operation, allowing the USB module to
The internal oscillator block provides a stable reference
source that gives the PIC18F46J50 Family additional
features for robust operation:
• Fail-Safe Clock Monitor: This option constantly
• Two-Speed Start-up: This option allows the
1.1.4
The PIC18F46J50 Family provides ample room for
application code, from 16 Kbytes to 64 Kbytes of code
space. The Flash cells for program memory are rated
to last in excess of 10000 erase/write cycles. Data
retention without refresh is conservatively estimated to
be greater than 20 years.
The Flash program memory is readable and writable
during normal operation. The PIC18F46J50 Family
also provides plenty of room for dynamic application
data with up to 3.8 Kbytes of data RAM.
resonators.
a divide-by-4 clock output.
8 MHz clock and an INTRC source (approxi-
mately 31 kHz, stable over temperature and V
as well as a range of six user-selectable clock
frequencies, between 125 kHz to 4 MHz, for a
total of eight clock frequencies. This option frees
an oscillator pin for use as an additional general
purpose I/O.
available to the high-speed crystal, and external
and internal oscillators, providing a clock speed
up to 48 MHz.
run from a high-frequency oscillator while the rest
of the microcontroller is clocked at a different
frequency.
monitors the main clock source against a reference
signal provided by the internal oscillator. If a clock
failure occurs, the controller is switched to the
internal oscillator, allowing for continued low-speed
operation or a safe application shutdown.
internal oscillator to serve as the clock source
from Power-on Reset (POR), or wake-up from
Sleep mode, until the primary clock source is
available.
OSCILLATOR OPTIONS AND
FEATURES
EXPANDED MEMORY
DS39931C-page 11
DD
),