C8051F526-IMR Silicon Labs, C8051F526-IMR Datasheet - Page 88

• Manufacturer Part Number: C8051F526-IMR
• Description: 8-bit Microcontrollers - MCU 2KB 12ADC 125C LIN 10Pin MCU
• Manufacturer: Silicon Labs

Specifications of C8051F526-IMR

• Product Category: 8-bit Microcontrollers - MCU
• Rohs: yes
• Core: 8051
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 2 KB
• Data Ram Size: 256 B
• On-chip Adc: Yes
• Package / Case: DFN-10
• Mounting Style: SMD/SMT
• A/d Bit Size: 12 bit
• A/d Channels Available: 6
• Interface Type: SPI, UART
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 6
• Number Of Timers: 3
• On-chip Dac: No
• Processor Series: C8051
• Program Memory Type: Flash
• Factory Pack Quantity: 1500
• Supply Voltage - Max: 2.7 V, 5.25 V
• Supply Voltage - Min: 2 V, 2.7 V

C8051F52x/F53x
SFR Definition 8.4. PSW: Program Status Word
88
Bit7:
Bit6:
Bit5:
Bits4–3: RS1–RS0: Register Bank Select.
Bit2:
Bit1:
Bit0:
R/W
CY
Bit7
CY: Carry Flag.
This bit is set when the last arithmetic operation resulted in a carry (addition) or a borrow
(subtraction). It is cleared to 0 by all other arithmetic operations.
AC: Auxiliary Carry Flag
This bit is set when the last arithmetic operation resulted in a carry into (addition) or a borrow
from (subtraction) the high order nibble. It is cleared to 0 by all other arithmetic operations.
F0: User Flag 0.
This is a bit-addressable, general purpose flag for use under software control.
These bits select which register bank is used during register accesses.
OV: Overflow Flag.
This bit is set to 1 under the following circumstances:
• An ADD, ADDC, or SUBB instruction causes a sign-change overflow.
• A MUL instruction results in an overflow (result is greater than 255).
• A DIV instruction causes a divide-by-zero condition.
The OV bit is cleared to 0 by the ADD, ADDC, SUBB, MUL, and DIV instructions in all other
cases.
F1: User Flag 1.
This is a bit-addressable, general purpose flag for use under software control.
PARITY: Parity Flag.
This bit is set to 1 if the sum of the eight bits in the accumulator is odd and cleared if the sum
is even.
0
0
1
1
RS1
R/W
AC
Bit6
0
1
0
1
RS0
R/W
Bit5
F0
0
1
2
3
Register Bank
RS1
R/W
Bit4
0x00–0x07
0x08–0x0F
0x10–0x17
0x18–0x1F
Rev. 1.4
RS0
R/W
Bit3
Address
R/W
OV
Bit2
R/W
Bit1
F1
SFR Address: 0xD0
PARITY
Bit0
R
00000000
Addressable
Reset Value
Bit