C8051F526-IMR Silicon Labs, C8051F526-IMR Datasheet - Page 100

• Manufacturer Part Number: C8051F526-IMR
• Description: 8-bit Microcontrollers - MCU 2KB 12ADC 125C LIN 10Pin MCU
• Manufacturer: Silicon Labs

Specifications of C8051F526-IMR

• Product Category: 8-bit Microcontrollers - MCU
• Rohs: yes
• Core: 8051
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 2 KB
• Data Ram Size: 256 B
• On-chip Adc: Yes
• Package / Case: DFN-10
• Mounting Style: SMD/SMT
• A/d Bit Size: 12 bit
• A/d Channels Available: 6
• Interface Type: SPI, UART
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 6
• Number Of Timers: 3
• On-chip Dac: No
• Processor Series: C8051
• Program Memory Type: Flash
• Factory Pack Quantity: 1500
• Supply Voltage - Max: 2.7 V, 5.25 V
• Supply Voltage - Min: 2 V, 2.7 V

C8051F52x/F53x
10.4. Interrupt Register Descriptions
The SFRs used to enable the interrupt sources and set their priority level are described below. Refer to the
data sheet section associated with a particular on-chip peripheral for information regarding valid interrupt
conditions for the peripheral and the behavior of its interrupt-pending flag(s).
SFR Definition 10.1. IE: Interrupt Enable
100
Bit7:
Bit6:
Bit5:
Bit4:
Bit3:
Bit2:
Bit1:
Bit0:
R/W
EA
Bit7
EA: Global Interrupt Enable.
This bit globally enables/disables all interrupts. It overrides the individual interrupt mask set-
tings.
0: Disable all interrupt sources.
1: Enable each interrupt according to its individual mask setting.
ESPI0: Enable Serial Peripheral Interface (SPI0) Interrupt.
This bit sets the masking of the SPI0 interrupts.
0: Disable all SPI0 interrupts.
1: Enable interrupt requests generated by SPI0.
ET2: Enable Timer 2 Interrupt.
This bit sets the masking of the Timer 2 interrupt.
0: Disable Timer 2 interrupt.
1: Enable interrupt requests generated by the TF2L or TF2H flags.
ES0: Enable UART0 Interrupt.
This bit sets the masking of the UART0 interrupt.
0: Disable UART0 interrupt.
1: Enable UART0 interrupt.
ET1: Enable Timer 1 Interrupt.
This bit sets the masking of the Timer 1 interrupt.
0: Disable all Timer 1 interrupt.
1: Enable interrupt requests generated by the TF1 flag.
EX1: Enable External Interrupt 1.
This bit sets the masking of the external interrupt 1.
0: Disable external interrupt 1.
1: Enable extern interrupt 1 requests.
ET0: Enable Timer 0 Interrupt.
This bit sets the masking of the Timer 0 interrupt.
0: Disable all Timer 0 interrupt.
1: Enable interrupt requests generated by the TF0 flag.
EX0: Enable External Interrupt 0.
This bit sets the masking of the external interrupt 0.
0: Disable external interrupt 0.
1: Enable extern interrupt 0 requests.
ESPI0
R/W
Bit6
ET2
R/W
Bit5
ES0
R/W
Bit4
Rev. 1.4
ET1
R/W
Bit3
EX1
R/W
Bit2
ET0
R/W
Bit1
SFR Address:
EX0
R/W
Bit0
00000000
Addressable
Reset Value
0xA8
Bit