LPC47M142-NC Standard Microsystems (SMSC), LPC47M142-NC Datasheet - Page 132

no-image

LPC47M142-NC

Manufacturer Part Number
LPC47M142-NC
Description
Manufacturer
Standard Microsystems (SMSC)
Datasheet

Specifications of LPC47M142-NC

Lead Free Status / RoHS Status
Not Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LPC47M142-NC
Manufacturer:
SMSC
Quantity:
55
Part Number:
LPC47M142-NC
Quantity:
1 715
Part Number:
LPC47M142-NC
Manufacturer:
SMSC
Quantity:
281
SMSC DS – LPC47M14X
PME_EN5
Default = 0x00
N/A
SMI_STS1
Default = 0x02
on VTR POR
Bit 1 is set to ‘1’ on
VCC POR,
VTR POR,
HARD RESET and
SOFT RESET
SMI_STS2
Default = 0x00
on VTR POR
on VTR POR
NAME
REG OFFSET
(R/W)
(R/W)
(R/W)
(hex)
(R)
0E
0F
10
11
PME Wake Enable Register 5
This register is used to enable individual LPC47M14x
PME wake sources onto the nIO_PME wake bus.
When the PME Wake Enable register bit for a wake
source is active (“1”), if the source asserts a wake event
so that the associated status bit is “1” and the PME_En
bit is “1”, the source will assert the nIO_PME signal.
When the PME Wake Enable register bit for a wake
source is inactive (“0”), the PME Wake Status register
will indicate the state of the wake source but will not
assert the nIO_PME signal.
Bit[0] GP50
Bit[1] GP51
Bit[2] GP52
Bit[3] GP53
Bit[4] GP54
Bit[5] GP55
Bit[6] GP56
Bit[7] GP57
The PME Wake Enable register is not affected by Vcc
POR, SOFT RESET or HARD RESET.
Reserved – reads return 0
SMI Status Register 1
This register is used to read the status of the SMI inputs.
The following bits must be cleared at their source.
Bit[0] Reserved
Bit[1] PINT. The parallel port interrupt defaults to ‘1’ when
the parallel port activate bit is cleared. When the parallel
port is activated, PINT follows the nACK input.
Bit[2] U2INT
Bit[3] U1INT
Bit[4] FINT
Bit[5] MPU-401 INT
Bit[6] Reserved
Bit[7] Reserved (Note 7)
SMI Status Register 2
This register is used to read the status of the SMI inputs.
Bit[0] MINT. Cleared at source.
Bit[1] KINT. Cleared at source.
Bit[2] IRINT. This bit is set by a transition on the IR pin
(IRRX or IRRX2 as selected in CR L5-F1-B6 i.e., after the
MUX). Cleared by a read of this register.
Bit[3] Reserved
Bit[4] P12. Cleared at source.
Bit[7:5] Reserved
Page 132
DESCRIPTION
Rev. 03/19/2001

Related parts for LPC47M142-NC