DV007003 Microchip Technology, DV007003 Datasheet - Page 91

no-image

DV007003

Manufacturer Part Number
DV007003
Description
PROGRAMMER UNIVERSAL PROMATE II
Manufacturer
Microchip Technology
Series
PRO MATE® IIr
Type
Universalr
Datasheets

Specifications of DV007003

Contents
Programmer, Power Supply, Assembler/Simulator, Cable, Software and Documentation
Positions/sockets
1
Lead Free Status / RoHS Status
Request inventory verification / Request inventory verification
For Use With/related Products
PIC16C5x, PIC16Cxx and PIC17Cxx 8-Bit Micro
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Request inventory verification / Request inventory verification
 2001 Microchip Technology Inc.
5.1
5.2
5.3
12
Chapter 5. Using PRO MATE II with PROCMD
Introduction
Highlights
Getting Started with PROCMD
5.3.1
This chapter covers the details of using the command line program PROCMD
to control PRO MATE II operations. When running under DOS, the PRO
MATE II device programmer must be connected to a PC that has the
PROCMD software. For information on installing PROCMD software on a PC,
see Chapter 2.
Topics covered in this chapter:
Once you have PROCMD installed on your PC (Chapter 2), you can use it to
send commands to the PRO MATE II.
Operating System Updates
If PRO MATE II did not recognize your socket module (the message “Socket
not supported” appears on power-up), you may need to update the operating
system. You can obtain the latest PRO MATE II operating system from the
Microchip web site (www.microchip.com). Once you have the update, you will
need to download this file to the PRO MATE II.
1. Turn the power off on the PRO MATE II.
2. While holding down the F1 and F3 keys, turn the power back on.
3. You should get the following messages on the PRO MATE II LCD:
4. Download the operating system file using PROCMD as follows:
5. Once the download is done, PRO MATE II will automatically restart, as
• Getting Started with PROCMD
• Examples of Use
• Usage Details
“Clearing Memory Now.....” and “Ready for Download....” If you do not,
repeat the previous steps.
PROCMD /<number> /d<filename>
where <number> = 1, 2, 3 or 4, depending on the COM port you are
using, and <filename> is the name of the operating system file.
if from power-on.
PRO MATE II USER’S GUIDE
DS30082J-page 85

Related parts for DV007003