DV007003 Microchip Technology, DV007003 Datasheet - Page 11

• Manufacturer Part Number: DV007003
• Description: PROGRAMMER UNIVERSAL PROMATE II
• Manufacturer: Microchip Technology
• Series: PRO MATE® IIr
• Type: Universalr

Specifications of DV007003

• Contents: Programmer, Power Supply, Assembler/Simulator, Cable, Software and Documentation
• Positions/sockets: 1
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• For Use With/related Products: PIC16C5x, PIC16Cxx and PIC17Cxx 8-Bit Micro
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Request inventory verification / Request inventory verification

 2001 Microchip Technology Inc.
Loading a Hex File
Checking for a Blank Device
Programming, Verifying, and Reading a Device
If you are not using an MPLAB project, but have a hex file ready for
programming into a device, select File > Import > Import to Memory to load
the hex code into the MPLAB Program Memory window. Select Window >
Program Memory to view the contents of program memory.
Insert the device to be programmed into the PRO MATE II socket.
Click Blank in the PRO MATE Device Programmer dialog to verify that the
device is blank (all bits set to ’1’).
If you are programming a one-time programmable (OTP) device, use the
Configuration Bits dialog to set the configuration bits to their factory settings.
Select PRO MATE > Blank Check OTP to make sure that all program memory
bits are set to ’1’ and that the configuration bits match the value in the
Configuration Bits dialog.
If you have followed the previous sections, you are ready to program a device.
To program the entire device, click Program in the PRO MATE Device
Programmer dialog.
To program selectively (part of program memory or configuration bits) select
PRO MATE > Program/Verify. Select the memory range and items to be
programmed, and click Program in the Program/Verify dialog.
When programming has completed, “Success” or “Failure” will appear to the
right of the Start Address. An error window displaying the expected and actual
data will appear if programming failed. If the bad data shows 0000, try
reseating the socket module and doing a blank check before trying to program
the device again.
Note:
If you are programming a windowed calibration device, be sure to
store its calibration data as described in Section 7.10 to ensure
proper operation of the device.
Quick Start
DS30082J-page 5