DV007003 Microchip Technology, DV007003 Datasheet - Page 79

• Manufacturer Part Number: DV007003
• Description: PROGRAMMER UNIVERSAL PROMATE II
• Manufacturer: Microchip Technology
• Series: PRO MATE® IIr
• Type: Universalr

Specifications of DV007003

• Contents: Programmer, Power Supply, Assembler/Simulator, Cable, Software and Documentation
• Positions/sockets: 1
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• For Use With/related Products: PIC16C5x, PIC16Cxx and PIC17Cxx 8-Bit Micro
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Request inventory verification / Request inventory verification

 2001 Microchip Technology Inc.
4.1
4.2
4.3
4.4
12
Chapter 4. Using PRO MATE II with the MPLAB IDE
Introduction
Highlights
Before You Begin
PRO MATE II Dialogs
This chapter describes the main steps in programming and reading a device
using the PRO MATE II development programmer.
Topics covered in this chapter:
Before you can use your PRO MATE II, you must perform the following
initialization steps:
1. Configure the serial port that the MPLAB IDE will use to communicate
2. If the PRO MATE menu item does not appear in the MPLAB menu,
3. Select development mode other than an emulator mode. Select Options
4. Enable (start) the programmer in order to display the PRO MATE II dia-
The PRO MATE Device Programmer dialog (Figure 4.1) and the
Configuration Bits dialog (Figure 4.2) are displayed whenever the
programmer is enabled. Closing the PRO MATE Device Programmer dialog
will disable the programmer. The options on the screen will show the current
values. If the option is unavailable, the item appears in gray (not black) text.
The bits listed in the Configuration Bits dialog depend on the device you have
selected.
The next section will discuss how these dialogs are used to program devices.
• Setup for Programming a Device
• Programming a PICMicro Device
• Verifying the Programming
• Reading a Device
with the PRO MATE II. Select Options > Programmer Options > Commu-
nications Port Setup and follow the instructions in Section 2.8.
select PRO MATE II as your programmer. Select Options > Programmer
Options > Select Programmer as described in Section 2.9.
> Development Mode and follow the instructions in Section 2.10.
logs you will use to set up your programming parameters. Select
PRO MATE > Enable Programmer as described in Section 2.11.
PRO MATE II USER’S GUIDE
DS30082J-page 73