DV007003 Microchip Technology, DV007003 Datasheet - Page 122

• Manufacturer Part Number: DV007003
• Description: PROGRAMMER UNIVERSAL PROMATE II
• Manufacturer: Microchip Technology
• Series: PRO MATE® IIr
• Type: Universalr

Specifications of DV007003

• Contents: Programmer, Power Supply, Assembler/Simulator, Cable, Software and Documentation
• Positions/sockets: 1
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• For Use With/related Products: PIC16C5x, PIC16Cxx and PIC17Cxx 8-Bit Micro
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Request inventory verification / Request inventory verification

PRO MATE II User’s Guide
8.4
DS30082J-page 116
Error Descriptions
Command line parameters can appear in any order and are not case
sensitive. If no parameters are specified, the help screen will be displayed.
Checks will be made to ensure that valid values are specified for command
line options. Voltages must be specified in millivolts, and must be given in
125 mV steps.
You can set up the device programmer, program a device with the currently
loaded contents of the device programmer, or completely specify the contents
of a device to be programmed.
PROCMD returns the following error level values:
Table 8.1: PROCMD Error Descriptions
Level
Error
Note:
0
1
2
3
4
5
Operation Successful
PRO MATE not found
Wrong socket module
File not found
Illegal device specified The specified device is either not
Illegal voltage
specified
PRO MATE only supports a 250 mV step.
Description
Function proceeded with no errors.
Could not establish communication with
PRO MATE.
Possible causes are that the:
1. PRO MATE II serial cable is not
2. PRO MATE II is not powered up.
3. PRO MATE II is not connected to the
The selected device is not supported by
the socket module currently installed in
PRO MATE.
A specific operating system, program
memory, or SQTP file was not found.
supported by PRO MATE II or is not
supported by the command line interface to
PRO MATE II. HCS devices and Smart
Serial EEPROMs are not supported by the
command line interface.
A specified voltage is outside of the valid
range for the selected device, V
less than V
not an even multiple of 125 mV (for 125 mV
steps).
attached.
selected communications port.
DD
Possible Cause
Min, or a specified voltage is
 2001 Microchip Technology Inc.
DD
Max is