DV007003 Microchip Technology, DV007003 Datasheet - Page 141

• Manufacturer Part Number: DV007003
• Description: PROGRAMMER UNIVERSAL PROMATE II
• Manufacturer: Microchip Technology
• Series: PRO MATE® IIr
• Type: Universalr

Specifications of DV007003

• Contents: Programmer, Power Supply, Assembler/Simulator, Cable, Software and Documentation
• Positions/sockets: 1
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• For Use With/related Products: PIC16C5x, PIC16Cxx and PIC17Cxx 8-Bit Micro
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Request inventory verification / Request inventory verification

 2001 Microchip Technology Inc.
A.4.5
Device Drivers
V
programmed. Also, the system is able to read the data pins of the device at
V
The pin drivers are active devices, capable of driving the device pin low or
high. Each driver can drive the device to be programmed at the required
voltage (V
output voltage of 0 to 6.5V, with a maximum rise time of 200 nsec. Maximum
overshoot/undershoot is less than 5%. DC characteristics are as follows:
Table A.4: DC Characteristics
Rise time of the pin drivers is on the order of 100 nsec, with a propagation
delay of less than 200 nsec from the end of the write pulse (measurements
taken at the socket module connector, over the full voltage range of 2.0 to
6.5 V).
Specification Summary:
Symbol
DD
DD
Note:
Note:
V
V
• DC output voltage: 0 to 6.5V
• Maximum resistive load on output: 100 kOhms
• Maximum capacitive load on output: 1000 pF
• Minimum high-level output voltage: 1.9V
• Maximum low-level output voltage: 0.1V
• Maximum rise time: 200nsec
• Maximum fall time: 200nsec
• Maximum overshoot/undershoot: 3.5%
OH
OL
level signals are provided to the data and clock pins of the device to be
levels. There are 32 I/O V
DD
Minimum high-level output voltage (V
below V
Rise time is the time the transient spends between 10 and 90% of
its final value (V
Minimum High-level
Output Voltage
Maximum Low-level
Output Voltage
), one CMOS load per driver. The device drivers provide a DC
Parameter
DD
supply voltage.
OH
).
Hardware Specifications
DD
pin drivers.
V
2.0
4.5
6.0
2.0
4.5
6.0
DD
OH
Limit
) will be no less than 0.1V
1.9
4.4
5.9
0.1
0.1
0.1
Unit
DS30082J-page 135
V
V