DV007003 Microchip Technology, DV007003 Datasheet - Page 31

• Manufacturer Part Number: DV007003
• Description: PROGRAMMER UNIVERSAL PROMATE II
• Manufacturer: Microchip Technology
• Series: PRO MATE® IIr
• Type: Universalr

Specifications of DV007003

• Contents: Programmer, Power Supply, Assembler/Simulator, Cable, Software and Documentation
• Positions/sockets: 1
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• For Use With/related Products: PIC16C5x, PIC16Cxx and PIC17Cxx 8-Bit Micro
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Request inventory verification / Request inventory verification

 2001 Microchip Technology Inc.
2.4.2
2.4.3
Installing the Communications Cable
PRO MATE II provides communications with the host PC via an RS-232
9-pin D-type connector. PRO MATE II is data communication equipment
(DCE), and hardware handshaking is via clear-to-send (CTS) and request-to-
send (RTS).
A 6-foot data cable with DB-9 connectors is supplied with PRO MATE II. All
lines on the data cable are wired straight through. This cable is not a null
modem cable.
Installing the Power Supply
PRO MATE II comes with a 9V power supply. The earlier PRO MATE
programmer came with a 5V power supply.
The PRO MATE II requires +9 volts at 750 mA. The power connector is a 2.5
mm DC power jack (Switchcraft P/N RAPC-712). A 0.75A fuse (Littlefuse
Nano2Smf, P/N 451.750) is located near the +9V input on the PRO MATE II
motherboard for circuit protection.
The PRO MATE device programmer requires +5 volts ±5% at 750 mA on the
5-pin DIN connector (5 VDC IN). Pin 3 is +5 Volts, pins 1, 2, and 4 are ground,
and pin 5 is not connected.
Installing and Setting Up PRO MATE II
• Connect one end of the cable to an available COM port on your PC.
• Connect the cable from the PC COM port to the RS-232 connector on
Check your PC setup to see which communications port is available.
Usually a mouse device is connected to COM1 or COM2. If you have a
modem, you might not have a third serial port on your PC.
the back of the PRO MATE II.
Figure 2.2: Back of PRO MATE Programmer
Figure 2.1: Back of PRO MATE II
3
5
2
+9V
GND
4
1
DS30082J-page 25