DV007003 Microchip Technology, DV007003 Datasheet - Page 108

• Manufacturer Part Number: DV007003
• Description: PROGRAMMER UNIVERSAL PROMATE II
• Manufacturer: Microchip Technology
• Series: PRO MATE® IIr
• Type: Universalr

Specifications of DV007003

• Contents: Programmer, Power Supply, Assembler/Simulator, Cable, Software and Documentation
• Positions/sockets: 1
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• For Use With/related Products: PIC16C5x, PIC16Cxx and PIC17Cxx 8-Bit Micro
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Request inventory verification / Request inventory verification

PRO MATE II User’s Guide
7.8
DS30082J-page 102
PRO MATE II Menu Items
After reading a device into the MPLAB IDE, its data will appear in the Program
Memory window. You can use the Modify dialog to change the data (Window
> Modify), then save it to a hex file by selecting File > Export > Export Hex
File.
The PRO MATE menu items perform the following functions:
Calibration Memory
• Enable/Disable Programmer – Enable or disable the programmer.
• Program/Verify – Opens the Program/Verify dialog. You can program
• Read Device – Opens the Read Device dialog which allows you to read
• Blank Check All – Checks that the device is completely blank (all bits
• Blank Check OTP – This function is intended for use with OTP devices
• Display Error Log – When you have programmed a device or verified
• Erase Program Memory – Sets all bits in the Program Memory window
Once the programmer is enabled, this menu item changes to Disable
Programmer.
the data as shown in the Program Memory window or verify that the
data in the device in the PRO MATE socket matches data in the Pro-
gram Memory window. You can specify the range and type of memory
(e.g., program memory) areas on the target device to be programmed
or verified. If the Verify process indicates several locations of bad data
and those locations show as 0000, reseat the socket module and do a
blank check.
the program and configuration bits of the device. You can set the pro-
gram memory range and the other read options.
are set to a ‘1’). This will also check that all configuration bits are set to
a ‘1’ (unprogrammed state).
that come with factory programmed configuration bits. Before using this
function, set the displayed configuration bits to match the factory pro-
grammed settings. The function verifies that all program memory bits
are set to ‘1’ and that the configuration bits match the settings displayed
in the Configuration Bits window.
a device, an error window will show you data from memory in the device
that do not match the corresponding memory in the MPLAB IDE.
and EEPROM Data Memory window (if applicable) to ‘1’.
For devices with calibration memory, read the data
in calibration memory into the Calibration Memory
window. For more information on calibration mem-
ory, refer to Section 3.3.
 2001 Microchip Technology Inc.