PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 90

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
<2> [Supply oscillator] area
<When Port-ch0, Port-ch1 or Port-ch2 is selected>
[IIC Address] area
If I
device. The valid input range is 8 to 77h. Do not input a unit. The slave address can be any value in the above
range but must not be the same as the slave address of another target device on the I
available if the I
Set the clock to be supplied to the target device.
[Frequency] text box
Set the oscillation frequency of the clock supplied to the target device. When using the clock mounted on the
target system ([On Target] check box selected), input its oscillation frequency. When using the clock on the FP5
side ([On Target] check box cleared), input one of the following.
Remark
2
• 100k Baud
• 100 Hz
• 200 Hz
• 300 Hz
• 400 Hz
• 500 Hz
• 600 Hz
• 800 Hz
• 1000 Hz
• 1200 Hz
• 1500 Hz
• 2000 Hz
• 1 MHz
• 2 MHz
• 4 MHz
• 5 MHz
• 6 MHz
• 8 MHz
• 9 MHz
• 10 MHz
• 12 MHz
• 16 MHz
• 20 MHz
C is selected as the communication channel, input a hexadecimal number as a slave address of the target
For the selectable frequency, refer to the user's manual for the device used.
2
C port is not selected.
Figure 4-62. [Supply oscillator] Area
CHAPTER 4 PROGRAMMING GUI USAGE
2
C. This field is not
Page 90 of 240