PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 124

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
[Autoprocedure(E.P.)] commands without a host machine. This mode is useful for using the FP5 on the production line
during mass production and for upgrading in the field.
6.1
in the multiple internal flash memory areas (programming areas) and write it. New PR5 files, ESF files and program files
cannot be downloaded to the FP5 in this mode. Programming is possible only in environments to which files were
downloaded last time by the programming GUI.
6.2
the message display and status LEDs. When the FP5 Manager dialog box is used to enable [Enable Bank mode] or
[Enable Simple mode], the functions of the control buttons and message display will change. Refer to 4.3.2 (9) [FP5
Manager] command and CHAPTER 7 USAGE THE REMOTE CONNECTOR FOR DETAILS. This chapter will describe
usage in the normal mode.
currently running cannot be stopped, except for the [Read] command.
the display returns to the same command menu after execution.
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
CANCEL or START on the top of the FP5 main unit.
The FP5 has a standalone mode in which the FP5 by itself can execute the [Erase], [Program], and
In standalone mode, the FP5 can select any programming area based on PR5 files, ESF files and program files stored
In standalone mode, command menus are selected and executed using the control button
The selected command menu is displayed in the message display, and the result of command execution is indicated by
The command menu consists of two levels of menus: a main menu and submenu.
The NEXT button is used to display the next menu on the same level.
The ENTER button is used to select or execute the menu item currently displayed.
The CANCEL button is used to cancel the current selection and return to the previous menu level. The command
The START button executes the [Autoprocedure(E.P.)] command. It can be executed from any command menu, and
Before Starting Standalone Operation
Description of Buttons, Message Display and Status LEDs
CHAPTER 6 USAGE IN STANDALONE MODE
CHAPTER 6 USAGE IN STANDALONE MODE
NEXT ,
Page 124 of 240
ENTER ,