PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 200

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
12.1 Problems During Startup
(1) The POWER button on FP5 is pressed but the LED does not turn on.
(2) When the USB cable is connected and power to the FP5 is turned on, the driver is not recognized by Plug and
(3) The USB driver file cannot be found at a specified location.
(4)The “Add New Hardware Wizard” screen appears when FP5 is connected with the host machine via a USB port.
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
This chapter explains troubleshooting.
Remark
This section explains troubleshooting for problems that may occur between software installation and startup.
Play.
[Cause]
[Action]
[Cause]
[Action]
[Cause]
[Action]
[Cause]
[Action]
The cause may be a poor connection of the FP5 or AC adapter, or a possible defect.
Confirm that the AC adapter is plugged in firmly. If this does not resolve the problem, consider repair.
The USB connector may not be inserted properly into the USB port.
Confirm that the USB connectors are fully inserted into the USB ports of the host machine and the FP5.
Alternatively, disconnect the USB connector and insert it again after a short time.
The programming GUI may not have been installed correctly.
Refer to CHAPTER 3 SOFTWARE INSTALLATION and reinstall the programming GUI.
If the file is requested by Plug and Play, specify the following path for the programming GUI. (Vx.xx is the version of
the programming GUI.)
If the USB connector is not inserted into the USB port used during USB driver installation but into another USB port,
the FP5 may be recognized as a new hardware item.
Refer to CHAPTER 3 SOFTWARE INSTALLATION and install the USB driver again.
C:\Program Files\NEC Electronics Tools\PG-FP5\Vx.xx\driver
Using the self-testing function, the user can find out the reason why the FP5 does not operate normally,
such as a defect in the FP5, or problems in other hardware. For how to use the tool, refer to 4.3.2 (6) [Self-
Test] command.
CHAPTER 12 TROUBLESHOOTING
CHAPTER 12 TROUBLESHOOTING
Page 200 of 240