PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 14

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
<Programming GUI operation>
an INI file.
<Standalone operation>
can be executed without using the host machine. It is suitable for use in production lines during mass production or
upgrading programs in the field.
<Communications Command Operation>
<Remote Operation>
<Program files>
<PR5 files>
device. Do not change the PR5 file data because it affects assurance of written data; otherwise, the programming GUI will
not recognize the PR5 file.
<ESF files>
PR5 file names. If the file contains invalid contents, the programming GUI will not recognize the ESF file.
<FP5 internal flash memory>
programming areas (Area 0 to Area 3) or eight independent 2 MB programming areas (Area 0 to Area 7). Program files
can be downloaded to each programming area, and which file, PR5 or ESF, is to be saved is selectable in programming
area units. That is, files can be individually downloaded in each programming area, and the area used can also be
selected individually. Program files, PR5 files and ESF files are retained even if the FP5 power is turned off.
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
The following operations can be performed with the programming GUI. The settings on the host machine are saved in
• ESF file creation
• Downloading program files, PR5 files and ESF files (saved into FP5 internal flash memory)
• Saving log files
• Editing program files (by using HEX editor)
• Checksum calculation
• Programming command execution (for Autoprocedure (E.P.), whether execution is completed normally is indicated by
• Execution of self-testing function
• Manager function (passwords, security, customization, etc.) setting
The FP5 can operate in standalone mode, whereby commands such as [Erase], [Program] and [Autoprocedure(E.P.)]
The following can be performed in standalone operation.
• Execute programming command
• Confirm contents of each downloaded file
FP5 can be operated by communications commands from the host machine.
Writing and PASS/ERROR displays can be operated and confirmed from external control devices.
The following types of HEX files can be used as program files. These files can be in Intel HEX format or Motorola HEX
format.
• HEX file: A HEX file of Intel HEX format type or Motorola HEX format type without option data
• HCUHEX file: A HEX file that integrates option data into a HEX file
PR5 files (parameter file) contain parameter information required for writing programs to the flash memory in the target
ESF files (customized setup file) contain the programming environment settings specific to the user environment and
The FP5 has a 16 MB flash memory area for saving program files. This memory area can be used as four 4 MB
beeps.)
CHAPTER 1 OVERVIEW
Page 14 of 240