HW-V5-ML555-G Xilinx Inc, HW-V5-ML555-G Datasheet - Page 13

• Manufacturer Part Number: HW-V5-ML555-G
• Description: BOARD EVAL FOR VIRTEX-5 ML555
• Manufacturer: Xilinx Inc
• Series: Virtex™ -5r
• Type: FPGAr

Specifications of HW-V5-ML555-G

• Contents: Board, Cables, CD
• Silicon Manufacturer: Xilinx
• Features: Parallel Connectivity, Three On-board Clock Sources
• Kit Contents: Board, Cables, CD, Power Supply
• Silicon Family Name: Virtex-5
• Silicon Core Number: XC5VLX50T-1FF1136
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Virtex™-5 FPGA
• For Use With: HW-AFX-SMA-SFP - CONVERSION MODULE SMA - SFPHW-AFX-SMA-SATA - CONVERSION MODULE SMA - SATAHW-AFX-SMA-RJ45 - CONVERSION MODULE SMA - RJ45HW-AFX-SMA-HSSDC2 - CONVERSION MODULE SMA - HSSDC2HW-AFX-BERG-EPHY - DAUGHTER CARD PHY BERG-EPHY
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 122-1586; HW-V5-ML555-G

Introduction
About the Virtex-5 FPGA ML555 Development Kit
Virtex-5 FPGA ML555 Development Kit
UG201 (v1.4) March 10, 2008
Parallel Bus Development for PCI Operation
R
To develop parallel Peripheral Component Interconnect (PCI™) bus and serial PCI
Express
and then plugged into a parallel PCI bus system unit or a serial PCI Express system unit.
The board supports 32-bit or 64-bit PCI bus datapaths. The ML555 board has an eight-lane
connector that allows the board to be plugged into an eight-lane add-in card socket for PCI
Express operation. The ML555 kit does not include a lane conversion adapter, which
would allow the eight-lane ML555 board to plug into an add-in card socket for single-lane
PCI Express operation.
Additional information and design resources associated with the ML555 development kit
is available at:
This Virtex-5 FPGA based kit provides a development platform for designing and
verifying PCI and PCI-X™ applications utilizing Xilinx LogiCORE™ intellectual property
(IP) cores in a 3.3V signaling environment. The ML555 board is intended to plug-in to a
3.3V keyed system board. The ML555 board is not a Universal add-in card nor is it
intended to plug into a 5V keyed system board.
system board slot (left side) from a non-supported 5V system board slot (right side).
http://www.xilinx.com/products/devkits/HW-V5-ML555-G.htm
®
bus add-in card applications, the Virtex™-5 FPGA ML555 board is configured
3.3V 64-bit Connector
I/O Buffers Powered
3.3V Add-in Card
on 3.0V Rail
Figure 1-1: Add-in Card Connectors
www.xilinx.com
Figure 1-1
Connector Dependent Rail
I/O Buffers Powered on
Dual Voltage Signalling
shows how to identify a 3.3V
5V 64-bit Connector
Add-in Card
Chapter 1
UG201_c1_01_050106
13