zic2410 California Eastern Laboratories, zic2410 Datasheet - Page 18

• Manufacturer Part Number: zic2410
• Description: Single-chip Solution, Compliant With Zigbee
• Manufacturer: California Eastern Laboratories

[Reset Circuit by adjusting ELM7527NB]
Checking the RESET-IC Circuit
[RESET Timing ]
Rev A
1. In the application circuit of ZIC2410, please connect RESET# PIN to Pull-up register and
2. When applying RESET-IC, detection voltage should be set over 1.9V.
3. The interval (T_reset) until from the time which reset signal by Reset IC has been
4. T_reset time is adjusted when modifying capacitor value connected to VDD (3.0).
should not connect it to capacitor.
adjusted to the time which the voltage of VDD (3.0) is dropped to 1.6V should be longer
than 1ms.
Figure 7 – Reset Circuit Using ELM7527NB
Figure 8 – Reset Timing Diagram
Document No. 0005-05-07-00-000
ZIC2410 Datasheet
Page 18 of 119