sak-c868p-1rr Infineon Technologies Corporation, sak-c868p-1rr Datasheet - Page 212

• Manufacturer Part Number: sak-c868p-1rr
• Description: 8 - Bit Cmos Microcontroller
• Manufacturer: Infineon Technologies Corporation

Field
ENWHE
ENIDLE
-
Registers INPL and INPH contains the interrupt node pointer bits, allowing for flexible
interrupt handling.
INPL
Capture/Compare Interrupt Node Pointer Register ,Low Byte
User’s Manual
7
INPCHE
rw
6
Bits
5
6
3, 7
5
Type Description
rw
rw
r
INPCC62
rw
Enable Interrupt for Wrong Hall Event
0
1
Enable Idle
This bit enables the automatic entering of the idle
state (bit CCU_IDLE will be set) after a wrong hall
event has been detected (bit WHE is set). During the
idle state, the bitfield MCMP is automatically cleared.
0
1
reserved;
returns ’0’ if read; should be written with ’0’;
4
No interrupt will be generated if the set
condition for bit WHE in register IS occurs.
An interrupt will be generated if the set
condition for bit WHE in register IS occurs. The
interrupt line, which will be activated is
selected by bitfield INPERR.
The bit CCU_IDLE is not automatically set
when a wrong hall event is detected.
The bit CCU_IDLE is automatically set when a
wrong hall event is detected.
7-28
3
INPCC61
rw
2
[Reset value: 40
Interrupt System
1
INPCC60
V 1.0, 2003-01
rw
C868
0
H
]