mc68hc908mr32 Freescale Semiconductor, Inc, mc68hc908mr32 Datasheet - Page 173

• Manufacturer Part Number: mc68hc908mr32
• Description: M68hc08 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

13.7.3 SCI Control Register 3
SCI control register 3 (SCC3):
R8 — Received Bit 8
T8 — Transmitted Bit 8
ORIE — Receiver Overrun Interrupt Enable Bit
NEIE — Receiver Noise Error Interrupt Enable Bit
FEIE — Receiver Framing Error Interrupt Enable Bit
PEIE — Receiver Parity Error Interrupt Enable Bit
Freescale Semiconductor
•
•
•
•
When the SCI is receiving 9-bit characters, R8 is the read-only ninth bit (bit 8) of the received character.
R8 is received at the same time that the SCDR receives the other eight bits.
When the SCI is receiving 8-bit characters, R8 is a copy of the eighth bit (bit 7). Reset has no effect on
the R8 bit.
When the SCI is transmitting 9-bit characters, T8 is the read/write ninth bit (bit 8) of the transmitted
character. T8 is loaded into the transmit shift register at the same time that the SCDR is loaded into
the transmit shift register. Reset has no effect on the T8 bit.
This read/write bit enables SCI error CPU interrupt requests generated by the receiver overrun bit, OR.
This read/write bit enables SCI error CPU interrupt requests generated by the noise error bit, NE.
Reset clears NEIE.
This read/write bit enables SCI error CPU interrupt requests generated by the framing error bit, FE.
Reset clears FEIE.
This read/write bit enables SCI receiver CPU interrupt requests generated by the parity error bit, PE.
See
1 = SCI error CPU interrupt requests from OR bit enabled
0 = SCI error CPU interrupt requests from OR bit disabled
1 = SCI error CPU interrupt requests from NE bit enabled
0 = SCI error CPU interrupt requests from NE bit disabled
1 = SCI error CPU interrupt requests from FE bit enabled
0 = SCI error CPU interrupt requests from FE bit disabled
1 = SCI error CPU interrupt requests from PE bit enabled
0 = SCI error CPU interrupt requests from PE bit disabled
Stores the ninth SCI data bit received and the ninth SCI data bit to be transmitted
Enables SCI receiver full (SCRF)
Enables SCI transmitter empty (SCTE)
Enables the following interrupts:
–
–
–
–
13.7.4 SCI Status Register
Receiver overrun interrupts
Noise error interrupts
Framing error interrupts
Parity error interrupts
Address:
Reset:
Read:
Write:
$003A
Bit 7
R8
R
U
R
MC68HC908MR32 • MC68HC908MR16 Data Sheet, Rev. 6.1
Figure 13-10. SCI Control Register 3 (SCC3)
= Reserved
T8
U
6
1. Reset clears PEIE.
R
5
0
0
R
4
0
0
U = Unaffected
ORIE
3
0
NEIE
2
0
FEIE
1
0
PEIE
Bit 0
0
I/O Registers
173