ADUC7060 Analog Devices, ADUC7060 Datasheet - Page 82

• Manufacturer Part Number: ADUC7060
• Description: Low-Power, Precision Analog Microcontroller, Dual ?-? ADCs, Flash/EE, ARM7TDMI
• Manufacturer: Analog Devices

Specifications of ADUC7060

• Mcu Core: ARM7 TDMI
• Mcu Speed (mips): 10
• Sram (bytes): 4096Bytes
• Gpio Pins: 14
• Adc # Channels: 10
• Other: 14 Bit DAC,PWM

ADuC7060/ADuC7061
Table 89. COMCON0 MMR Bit Designations
Bit
7
6
5
4
3
2
1:0
Name
DLAB
BRK
SP
EPS
PEN
Stop
WLS
Description
Divisor latch access.
Set by user to enable access to the COMDIV0 and COMDIV1 registers.
Cleared by user to disable access to COMDIV0 and COMDIV1 and enable access to COMRX,
COMTX, and COMIEN0.
Set break.
Set by user to force transmit to 0.
Cleared to operate in normal mode.
Stick parity. Set by user to force parity to defined values.
1 if EPS = 1 and PEN = 1.
0 if EPS = 0 and PEN = 1.
Even parity select bit.
Set for even parity.
Cleared for odd parity.
Parity enable bit.
Set by user to transmit and check the parity bit.
Cleared by user for no parity transmission or checking.
Stop bit.
Set by user to transmit 1.5 stop bits if the word length is 5 bits, or 2 stop bits if the word length is 6
bits, 7 bits, or 8 bits. The receiver checks the first stop bit only, regardless of the number of stop bits
selected.
Cleared by user to generate one stop bit in the transmitted data.
Word length select.
[00] = 5 bits.
[01] = 6 bits.
[10] = 7 bits.
[11] = 8 bits.
Rev. C | Page 82 of 108