KSZ8851SNLI Micrel Inc, KSZ8851SNLI Datasheet - Page 32

• Manufacturer Part Number: KSZ8851SNLI
• Manufacturer: Micrel Inc

Specifications of KSZ8851SNLI

• Operating Supply Voltage (typ): 3.3V
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 32
• Lead Free Status / RoHS Status: Supplier Unconfirmed

Micrel, Inc.
KSZ8851SNL/SNLI
Loopback Support
The KSZ8851SNL provides two loopback modes, one is Near-end (Remote) loopback to support for remote diagnostic of
failure at line side, and the other is Far-end (Local) loopback to support for local diagnostic of failure at host side. In
loopback mode, the speed at the PHY port will be set to 100BASE-TX full-duplex mode.
Near-end (Remote) Loopback
Near-end (Remote) loopback is conducted at PHY port 1 of the KSZ8851SNL. The loopback path starts at the PHY port’s
receive inputs (RXP/RXM), wraps around at the same PHY port’s PMD/PMA, and ends at the PHY port’s transmit outputs
(TXP/TXM).
Bit [9] of register P1SCLMD (0xF4) is used to enable near-end loopback. The ports 1 near-end loopback path is illustrated
in the following Figure 14.
Far-end (Local) Loopback
Far-end (Local) loopback is conducted at Host of the KSZ8851SNL. The loopback path starts at the host SPI FIFO write
to transmit data, wraps around at the PHY port’s PMD/PMA, and ends at the host SPI FIFO read to receive data.
Bit [14] of register P1MBCR (0xE4) is used to enable far-end loopback at host side. The host far-end loopback path is
illustrated in the following Figure 14.
Figure 14. PHY Port 1 Near-end (Remote) and Host Far-end (Local) Loopback Paths
August 2009
32
M9999-083109-2.0