MTCMR-H4-P1-GB/IE Multi-Tech Systems, MTCMR-H4-P1-GB/IE Datasheet - Page 55

• Manufacturer Part Number: MTCMR-H4-P1-GB/IE
• Description: MODEM CELLULAR QUAD GPRS HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-H4-P1-GB/IE

• Function: Transceiver, HSPA, Modem
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Data Rate - Maximum: 7.2 Mbps
• Features: UK Power Cord
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1122

Notes:
D> Originate a Call to Phone Number in Current Memory
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
Examples:
Description:
Syntax:
Values:
•
•
•
•
•
•
•
This command allows initiating an outgoing call directly from the current memory.
No Read and Test Commands
<mem>
ATD0123456789;
Note: Call the 0123456789 number, voice call
ATD0123456789P123;
Note: Call the 0123456789 number, voice call
with a pause and DTMF sequence 123
ATD0123456789
Note: Call the 0123456789 number, data call
ATD*#21#
Note: Check any call forwarding status
Action Command: ATD>[<mem>] OK / CONNECT <speed> / NO CARRIER /
Command
Command
If a GPRS PPP session is already running, the setting of a CSD (GSM data call) is not
supported.
For an international number, the local international prefix does not need to be set
(usually 00) but must be replaced by the ‘+’ character.
Note that some countries may have specific numbering rules for their GSM handset
numbering.
When the FDN phonebook has been activated (see +CLCK command), only numbers
beginning with the digits of FDN phonebook entries can be called. For example, if
“014629” is entered in the FDN phonebook all the phone numbers beginning with these
6 digits can be called.
An outgoing call attempt can be refused if the AOC service is active and credit has
expired (NO CARRIER).
As per GSM 02.30, GSM sequences may be controlled using dial commands. These
sequences can contain “*”, “#”, but “;” is forbidden in the sequence. For example, to
invoke or suppress CLIR service temporally, ATD*31#<nb>[;] and ATD#31#<nb>[;] can
be used (with ‘;’ at the end, a voice call will be launched).
If the FDN phonebook is activated, the call forwarding sequences are allowed only if
they are present in the FDN.
Memory Storage
If omitted, the currently selected phonebook is used.
SM
FD
ON
EN
LD
MC
ME
MT
RC
SN
ADN Abbreviated Dialing Numbers (SIM phonebook)
FDN Fixed Dialing Numbers (SIM restricted phonebook)
MSISDN (SIM own numbers)
ECC Emergency Call Codes (SIM or Mobile Equipment)
LND Last Number Dialed
Missed (unanswered received) Calls list
Mobile Equipment (flash) phonebook
Combined Mobile Equipment & SIM phonebook (Mobile Equipment + SM)
Received Calls list
SDN Service Dialing Numbers (SIM special service numbers)
BUSY / NO ANSWER
Responses
Chapter 3 – Supported GSM/WCDMA AT Commands
OK
Note: Call succeeds
OK
CONNECT 9600
Note: Call succeeds
+CCFC: 0,7
OK
Note: No call forwarding
Responses
55