MTCMR-H4-P1-GB/IE Multi-Tech Systems, MTCMR-H4-P1-GB/IE Datasheet - Page 54

• Manufacturer Part Number: MTCMR-H4-P1-GB/IE
• Description: MODEM CELLULAR QUAD GPRS HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-H4-P1-GB/IE

• Function: Transceiver, HSPA, Modem
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Data Rate - Maximum: 7.2 Mbps
• Features: UK Power Cord
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1122

A Answer Incoming Call
D Dial
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
Description:
Syntax:
Values:
Examples:
Description:
Syntax:
Values:
When the product receives a call, it sets the Ring Indicator signal and sends the ASCII
“RING” or “+CRING: <type>” string to the application (+CRING if the cellular result code
+CRC is enabled). Then it waits for the application to accept the call with the ATA command.
No Read and Test Commands
No parameters.
The ATD command sets a voice or data call. As per GSM 02.30, the dial command also
controls supplementary services.
The Following Emergency Numbers Are Available without a SIM Card
The Following Emergency Numbers Are Available with a SIM Card:
No Read and Test Commands
<nb>
<G>
;
<speed>
<I>
Command
Action Command: ATA OK
Command
ATA
ATH
Action Command:
ATD<nb> [<I>] [<G>] [;]
Command
000, 08, 110, 112, 118, 119, 911 and 999.
When the EF_ECC file is missing from SIM: 112 and 911.
When SIM includes an EF_ECC file: 112, 911 and any Emergency Numbers
available in the EF_ECC file.
Note: Answer to this incoming call
Note: Disconnect call
Destination Phone Number (ASCII string) or GSM Sequence
0-9, *, #, +, A, B, C, D, P
CLIR Supplementary Service Subscription
If present, the CLIR supplementary service subscription is overridden
temporarily for this call only.
I
i
CUG Supplementary Service Information
If present, the CUG supplementary service information is overridden temporarily
for this call only.
G Activate
g
For Voice Call
If omitted, the call will be a data call.
Data Call Connection Speed in bps
300
1200
2400
4800
9600
14400
Activate (disable presentation of own phone number to remote)
Deactivate (enable presentation of own phone number to remote)
Deactivate
Responses
[Depending on GSM sequence]
OK/CONNECT<speed>/NO CARRIER/BUSY/NO ANSWER
Responses
Chapter 3 – Supported GSM/WCDMA AT Commands
Responses
RING
OK
OK
Note: Call accepted
Note: Call disconnected
Note: Incoming call
54