MTCMR-H4-P1-GB/IE Multi-Tech Systems, MTCMR-H4-P1-GB/IE Datasheet - Page 103

• Manufacturer Part Number: MTCMR-H4-P1-GB/IE
• Description: MODEM CELLULAR QUAD GPRS HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-H4-P1-GB/IE

• Function: Transceiver, HSPA, Modem
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Data Rate - Maximum: 7.2 Mbps
• Features: UK Power Cord
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1122

+CIND Indicator Control
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
Description:
Syntax:
Parameter Storage:
Examples:
Values:
This command is used to read or set the values of the mobile equipment (ME) indicators. If
the ME does not allow setting of indicators or currently cannot be reached, a "+CMEE
ERROR: <err>" is returned.
<ind>
<descr> Mobile Equipment Indicator Description
Command
Action Command:
None
Read Command:
AT+CIND?
Test Command:
AT+CIND=?
Command
AT+CIND?
AT+CIND=?
Note: Read possible value for
ME indicators
The Mobile Equipment Indicator State for One <descr> Parameter.
Integer type value, which shall be in the range corresponding to the <descr>
0
1
2-5 2 is more substantial than 1, and so on
signal
service
message
call
roam
smsfull
parameter.
None
Indicator is OFF or in a state that can be identified as "OFF" state
Indicator is ON or in a state that is more substantial than "OFF" state
Signal quality (0-5)
Service availability (0-1)
Message received (0-1)
Call in progress (0-1)
Roaming indicator (0-1)
SMS memory storage status in the modem (0-2)
0
1
2
Memory locations are available
Memory is full
One SMS has been received, but the SMS storage where this
SMS is to be stored is full.
Responses
+CIND: <ind>,<ind>,<ind>,<ind>,<ind>,<ind>,<ind>
OK
+CIND: <descr>,<list of supported <ind>s)) [,
(<descr>, (list of supported <ind>s)) [, …]
OK
Responses
+CIND: 2,1,1,0,0,0
OK
Note: signal: 2, service: 1 – ME registered on the
network, message:1 – an SMS has been received, call:
0 – no call is in progress, roam: 0 – not roaming,
smsfull:0 SIM – card is not full of SMS
+CIND: ("signal", (0-5)), ("service", 0-1)), ("message",
0-1)), ("call", 0-1)), ("roam", 0-1)), ("smsfull", 0-2)),
OK
Chapter 3 – Supported GSM/WCDMA AT Commands
103