MTCMR-H4-P1-GB/IE Multi-Tech Systems, MTCMR-H4-P1-GB/IE Datasheet - Page 115

• Manufacturer Part Number: MTCMR-H4-P1-GB/IE
• Description: MODEM CELLULAR QUAD GPRS HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-H4-P1-GB/IE

• Function: Transceiver, HSPA, Modem
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Data Rate - Maximum: 7.2 Mbps
• Features: UK Power Cord
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1122

High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
Syntax:
Values:
Parameter Storage:
Examples:
<format>
<stat>
<oper>
Note:
manual mode, this PLMN may not be the one set by the application (as it is in search
phase).
These commands are not allowed during communication.
<mode>
Action Command:
AT+COPS=<mode> [,<format> [ ,<oper>] ]
Read Command:
AT+COPS?
Test Command:
AT+COPS=?
Command
AT+COPS?
Note: Ask for current PLMN
AT+COPS=?
Note: Ask for PLMN list
AT+COPS=1,2,20810
Note: Ask for registration on SFR
network
Command
•
The read command returns the current mode and currently selected operator. In
The product enters into manual/automatic mode, and then tries to find an operator
as specified by the application (as in manual mode). If this attempt fails, it enters
automatic mode. If this is successful, the operator specified by the application is
selected. The mobile equipment then enters into automatic mode.
Network Registration Mode
0
1
2
3
4
Format of <oper> Field
0
1
2
Status of <oper> Field
0
1
2
3
Operator Identifier (MCC/MNC in Numeric Format only for Operator
Selection)
The long alphanumeric format can be up to 16 characters long (for operator
names description see "Operator Names" section in the Appendix in the field
"Name"). The short alphanumeric format can be up to 10 characters long.
The <format> and <mode> parameters are stored in EEPROM using AT&W.
The default value can be restored using AT&F.
Automatic. Default
Manual
Deregistration; ME (Mobile Equipment) will be unregistered until <mode>=0
or 1 is selected.
Set only <format> (for read command AT+COPS?)
Manual / automatic (<oper> shall be present). If manual selection fails,
automatic mode is entered.
Long alphanumeric format <oper>
Short alphanumeric format <oper>
Numeric <oper> Default
Unknown
Available
Current
Forbidden
Responses
+COPS: 0,2,20801
OK
Note: Home PLMN is Orange
+COPS: (2,”F SFR”,”SFR”,”20801”), (3,”F-BOUYGUES
TELECOM”,”BYTEL”,”20820”),(3,”Orange F”,”Orange”,
”20801”)
OK
+CME ERROR: 32
Note: Network not allowed – emergency calls only
Chapter 3 – Supported GSM/WCDMA AT Commands
networks have been detected
Note: Home PLMN is SFR. BYTEL and Orange
OK
+COPS: <mode> [,<format>,<oper>]
OK
+COPS: [list of supported (<stat>,long
alphanumeric <oper>,short alphanumeric
<oper>,numeric <oper)s]
OK
Responses
115