MTCMR-H4-P1-GB/IE Multi-Tech Systems, MTCMR-H4-P1-GB/IE Datasheet - Page 109

• Manufacturer Part Number: MTCMR-H4-P1-GB/IE
• Description: MODEM CELLULAR QUAD GPRS HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-H4-P1-GB/IE

• Function: Transceiver, HSPA, Modem
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Data Rate - Maximum: 7.2 Mbps
• Features: UK Power Cord
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1122

+CMEE Report Mobile Equipment Errors
+CMER Mobile Equipment Event Reporting
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
Description:
Syntax:
Values:
Parameter Storage:
Examples:
Description:
Syntax:
This command defines the method for returning error messages. The simple ERROR
message can be replaced by the verbose method to include the results codes +CME
ERROR: <err>. (See section "ME error result code: +CME ERROR" in the "Appendixes" of
the present document for "+CME ERROR" result codes description. See section "Message
service failure result code: +CMS ERROR" in the "Appendixes" of the present document for
"+CMS ERROR" result codes).
<n>
This command enables or disables the sending of unsolicited result codes in the case of a
key press.
Unsolicited Response: +CKEV: <key>, <press> (key press event report)
AT+CMEE=?
AT+CMEE=0
Note: Disable ME error reports; use only
"ERROR"
AT+CMEE=1
Note: Enable "+CME ERROR: <err>" or
"+CMS ERROR: <err>"
AT+CMEE?
Command
Action Command:
AT+CMER=[<mode>] [,[<keyp>] [,[<disp>]
Read Command:
AT+CMER?
Test Command:
None
Command
Action Command:
AT+CMEE=<n>
Read Command:
AT+CMEE?
Test Command:
AT+CMEE=?
[, [<ind>] [,[<bfr>] ] ] ] ]
Command
Error Reporting Method
0
1
The <n> parameter is stored in EEPROM using AT&W command. The default value
can be restored using AT&F.
Disable ME error reports; use only "ERROR. Default
Enable +CME ERROR: <err> or +CMS ERROR: <err>
+CIEV: <indresp>, <value> (indicator event report)
+CMEE: <n>
OK
+CMEE: (list of supported <n>s)
OK
Responses
OK
Chapter 3 – Supported GSM/WCDMA AT Commands
+CMEE: (0,1)
OK
OK
OK
+CMEE: 1
OK
Responses
OK
+CMER=<mode>,<keyp>,<disp>,<ind>,
<bfr>
OK
Responses
109