CY8C3244LTI-130 Cypress Semiconductor Corp, CY8C3244LTI-130 Datasheet - Page 59

PSOC3

CY8C3244LTI-130

Manufacturer Part Number
CY8C3244LTI-130
Description
PSOC3
Manufacturer
Cypress Semiconductor Corp
Series
PSOC™ 3 CY8C32xxr
Datasheet

Specifications of CY8C3244LTI-130

Package / Case
*
Voltage - Supply (vcc/vdd)
1.71 V ~ 5.5 V
Operating Temperature
-40°C ~ 85°C
Speed
50MHz
Number Of I /o
38
Eeprom Size
512 x 8
Core Processor
8051
Program Memory Type
FLASH
Ram Size
2K x 8
Program Memory Size
16KB (16K x 8)
Data Converters
A/D 2x12b, D/A 1x8b
Oscillator Type
Internal
Peripherals
CapSense, DMA, POR, PWM, WDT
Connectivity
EBI/EMI, I²C, LIN, SPI, UART/USART
Core Size
8-Bit
Processor Series
CY8C32
Core
8051
Data Bus Width
32 bit
Data Ram Size
2 KB
Interface Type
I2C, SPI, UART, USB
Maximum Clock Frequency
50 MHz
Number Of Programmable I/os
46
Number Of Timers
4
Operating Supply Voltage
1.71 V to 5.5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Controller Family/series
(8051) PSOC 3
No. Of I/o's
38
Eeprom Memory Size
0.5KB
Ram Memory Size
2KB
Cpu Speed
50MHz
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
CY8C3244LTI-130
Manufacturer:
CYPRESS/赛普拉斯
Quantity:
20 000
9. Programming, Debug Interfaces,
PSoC devices include extensive support for programming,
testing, debugging, and tracing both hardware and firmware.
Three interfaces are available: JTAG, SWD, and SWV. JTAG and
SWD support all programming and debug features of the device.
JTAG also supports standard JTAG scan chains for board level
test and chaining multiple JTAG devices to a single JTAG
connection.
For more information on PSoC 3 Programming, refer to the
application note
PSoC
Complete Debug on Chip (DoC) functionality enables full device
debugging in the final system using the standard production
device. It does not require special interfaces, debugging pods,
simulators, or emulators. Only the standard programming
connections are required to fully support debug.
The PSoC Creator IDE software provides fully integrated
programming and debug support for PSoC devices. The low cost
MiniProg3 programmer and debugger is designed to provide full
programming and debug support of PSoC devices in conjunction
with the PSoC Creator IDE. PSoC JTAG, SWD, and SWV
interfaces are fully compatible with industry standard third party
tools.
All DOC circuits are disabled by default and can only be enabled
in firmware. If not enabled, the only way to reenable them is to
erase the entire device, clear flash protection, and reprogram the
device with new firmware that enables DOC. Disabling DOC
features, robust flash protection, and hiding custom analog and
digital functionality inside the PSoC device provide a level of
Document Number: 001-56955 Rev. *K
Resources
®
3.
AN62391 - In-System Programming for
security not possible with multichip application solutions.
Additionally, all device interfaces can be permanently disabled
(Device Security) for applications concerned about phishing
attacks due to a maliciously reprogrammed device. Permanently
disabling interfaces is not recommended in most applications
because you cannot access the device later. Because all
programming, debug, and test interfaces are disabled when
Device Security is enabled, PSoCs with Device Security enabled
may not be returned for failure analysis.
Table 9-1. Debug Configurations
9.1 JTAG Interface
The IEEE 1149.1 compliant JTAG interface exists on four or five
pins (the nTRST pin is optional). The JTAG clock frequency can
be up to 8 MHz, or 1/3 of the CPU clock frequency for 8 and 16-bit
transfers, or 1/5 of the CPU clock frequency for 32-bit transfers,
whichever is least. By default, the JTAG pins are enabled on new
devices but the JTAG interface can be disabled, allowing these
pins to be used as General Purpose I/O (GPIO) instead. The
JTAG interface is used for programming the flash memory,
debugging, I/O scan chains, and JTAG device chaining.
All debug and trace disabled
JTAG
SWD
SWV
SWD + SWV
Debug and Trace Configuration
PSoC
®
3: CY8C32 Family
GPIO Pins Used
Data Sheet
Page 59 of 120
4 or 5
0
2
1
3

Related parts for CY8C3244LTI-130