CY8C3244LTI-130 Cypress Semiconductor Corp, CY8C3244LTI-130 Datasheet - Page 58

• Manufacturer Part Number: CY8C3244LTI-130
• Description: PSOC3
• Manufacturer: Cypress Semiconductor Corp
• Series: PSOC™ 3 CY8C32xxr

Specifications of CY8C3244LTI-130

• Package / Case: *
• Voltage - Supply (vcc/vdd): 1.71 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 50MHz
• Number Of I /o: 38
• Eeprom Size: 512 x 8
• Core Processor: 8051
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Program Memory Size: 16KB (16K x 8)
• Data Converters: A/D 2x12b, D/A 1x8b
• Oscillator Type: Internal
• Peripherals: CapSense, DMA, POR, PWM, WDT
• Connectivity: EBI/EMI, I²C, LIN, SPI, UART/USART
• Core Size: 8-Bit
• Processor Series: CY8C32
• Core: 8051
• Data Bus Width: 32 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI, UART, USB
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 46
• Number Of Timers: 4
• Operating Supply Voltage: 1.71 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Controller Family/series: (8051) PSOC 3
• No. Of I/o's: 38
• Eeprom Memory Size: 0.5KB
• Ram Memory Size: 2KB
• Cpu Speed: 50MHz
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.7 DAC
The CY8C32 parts contain a Digital to Analog Converter (DAC).
The DAC is 8-bit and can be configured for either voltage or
current output. The DAC supports CapSense, power supply
regulation, and waveform generation. The DAC has the following
features:
8.7.1 Current DAC
The current DAC (IDAC) can be configured for the ranges 0 to
32 µA, 0 to 256 µA, and 0 to 2.048 mA. The IDAC can be
configured to source or sink current.
Document Number: 001-56955 Rev. *K
Adjustable voltage or current output in 255 steps
Programmable step size (range selection)
Eight bits of calibration to correct ± 25 percent of gain error
Reference
Source
Scaler
Figure 8-8. DAC Block Diagram
8.7.2 Voltage DAC
For the voltage DAC (VDAC), the current DAC output is routed
through resistors. The two ranges available for the VDAC are 0
to 1.024 V and 0 to 4.096 V. In voltage mode any load connected
to the output of a DAC should be purely capacitive (the output of
the VDAC is not buffered).
Source and sink option for current output
8 Msps conversion rate for current output
1 Msps conversion rate for voltage output
Monotonic in nature
Data and strobe inputs can be provided by the CPU or DMA,
or routed directly from the DSI
Dedicated low-resistance output pin for high-current mode
I
I
1x , 8x , 64x
1x , 8x , 64x
source
sink
Range
Range
3R
R
PSoC
Vout
®
Iout
3: CY8C32 Family
Data Sheet
Page 58 of 120