CRT1-ID16TAH Omron, CRT1-ID16TAH Datasheet - Page 94

• Manufacturer Part Number: CRT1-ID16TAH
• Description: 16 In NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-ID16TAH

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Preparing Flat Connectors
Preparing DCN5-BR4 Flat Connector Plugs
Component Names
70
1,2,3...
■ Pressure-welding the Connector
Use the DWT-A02 Pliers to pressure-weld the connector.
1. Set the connector on the pressure-welding block of the crimping tool.
2. Squeeze firmly on the Pliers until the lock on the connector clicks into
3. After attaching the cable, confirm that it is properly pressure-welded as
Note When extending the cable or connecting it to a Terminating Resis-
As shown below, align the center (see arrows) of the connector cover with
the center of the pressure-welding block on the Pliers.
place.
shown below.
Be sure there are no gaps here.
Pliers
tor, make sure that the end of the cable is inserted all the way to the
cable stopper so that it will not be pulled out.
Connector position reference surfaces
Be sure that the connector is locked.
Cover
Connector cover
Section 3-3