CRT1-ID16TAH Omron, CRT1-ID16TAH Datasheet - Page 592

• Manufacturer Part Number: CRT1-ID16TAH
• Description: 16 In NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-ID16TAH

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Temperature Input Unit Functions
Checking the Wiring and
Making Adjustments
568
1,2,3...
Note
Input Terminal Connections
Wiring for Adjusting the Upper and Lower Limits
Lead wires for adjusting bias
Adjusting the Upper and Lower Limit Values
1. Set the wiring for adjusting the upper and lower limits. If connecting the
2. Check the sensor and input type being used.
When using an R, S, B, E, or W sensor, use a compensating conductor for a K
thermocouple. In addition, when using an R, S, or B sensor, set the input type
to K (0.0 to 500.0°C). When using an E or W sensor, set the input type to K
(−200 to 1,300°C).
3. Connect the CX-Integrator to the CompoNet network and go online.
4. Upload settings to the CX-Integrator.
5. Turn ON the power supplies of all Units, including the Temperature Input
6. Double-click the icon of the Temperature Input Unit to be set in the Network
7. Click the tab for the input that will be adjusted and click the Adjustment
NC
NC
NC
precision digital multimeter (DMM), use a ferrule for two wires.
Unit to be adjusted. Wait approximately 30 minutes for the Temperature In-
put Unit's internal temperature to stabilize.
Configuration Window or right-click the icon and select Parameters - Edit.
The Configuration Window will be displayed.
Button.
NC
0
−
STV
0
+
0
−
DMM
0
+
NC
NC
NC
NC
1
−
Ferrule for two wires
1
+
1
−
INPUT
Cold junction compensator
Compensating conductors
1
+
Cold junction compensator
NC
NC
NC
ZERO-CON (0°C bath)
NC
0°C/32°F
2
−
2
+
2
−
NC
2
+
NC
NC
NC
3
−
OUTPUT
3
+
Short-circuit
3
−
3
+
Section 11-6