CRT1-ID16TAH Omron, CRT1-ID16TAH Datasheet - Page 239

• Manufacturer Part Number: CRT1-ID16TAH
• Description: 16 In NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-ID16TAH

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Component Names and Functions (Same for CRT1-OD16S(-1) and CRT1-OD16SH(-1))
Indicator Section
Communications
Indicators
I/O Indicators
Setting the Node
Address
Units with Connectors
Refer to 4-1-3 Communications Indicators.
The meanings of the output indicators are given in the following table.
The detection status is also shown below for Slave Units with detection func-
tions.
CRT1-OD16SH(-1) Only
The node address is set as a decimal number with the 10s digit set on the left
rotary switch and the 1s digit set on the right rotary switch. (The maximum
node address is 63.)
The setting on the rotary switches is read when power is turned ON.
Communications
indicators: MS and NS
0 to 15
0 to 15
0
Name
Name
Communications
connector
0
Lit yellow.
Not lit.
Lit red.
Flashing
red.
Not lit.
Node address switches:
×10 and ×1 (from left)
LED status
LED status
1s digit of node address
10s digit of node address
Output I/O power supply connector
Output ON
Output OFF
Normal status
Short-circuit
detection
Disconnection
detection
Output indicators 0 to 15
I/O status
I/O status
I/O connectors (e-CON connectors)
The output is ON.
The output is OFF.
A load short-circuit
occurred.
A line is not connected.
The Unit is operating
normally.
Meaning
Meaning
Section 5-4
215