CRT1-ID16TAH Omron, CRT1-ID16TAH Datasheet - Page 612

• Manufacturer Part Number: CRT1-ID16TAH
• Description: 16 In NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-ID16TAH

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Device Maintenance
12-3 Device Maintenance
12-3-1 Cleaning
12-3-2 Inspections
Materials Required for
Inspections
Materials Used Regularly
Materials Sometimes
Required
Inspection Items
588
Note
This section describes routine device maintenance, in particular cleaning
methods, inspection methods, and how to replace Units.
Perform the following cleaning regularly to ensure the network is kept in the
best condition possible.
Never use benzine, thinners, or other volatile solvents, or chemical cloths. The
Unit coating may change if these products are used.
Always perform periodic inspections to ensure the network is kept in the best
possible condition.
Periodic inspections should occur every 6 months to a year. Periodic inspec-
tions should occur more frequently, however, for Units that are used in envi-
ronments subject to high temperatures, high humidity, or a lot of dust.
The following materials are required to perform periodic inspections.
Phillips screwdrivers and flat-blade screwdrivers
Screwdrivers for communications connectors
Testers (or digital voltmeters)
Industrial alcohol and pure cotton cloth
Synchroscope
Pen oscilloscope
Thermometer and hygrometer
Periodically inspect the following items to ensure that they do not deviate from
the criteria. If the items deviate from the criteria, adjust the environment so the
criteria are met or adjust the Unit itself.
Environment
Inspection
• Wipe the network over with a soft, dry cloth when doing daily cleaning.
• If dirt remains even after wiping with a soft, dry cloth, wipe over with a
• Units will become stained if items such as rubber or vinyl products or
cloth that has been wet with a sufficiently diluted detergent (2%) and
wrung dry.
adhesive tape are left on the Unit for a long period. Remove such items
during regular cleaning.
item
Are the ambient and
in-panel tempera-
tures appropriate?
Is the ambient and in-
panel humidity appro-
priate?
Has dust collected?
Inspection details
Refer to the specifi-
cations for each
Slave Unit.
Refer to the specifi-
cations for each
Slave Unit.
No dust
Criteria
Thermometer
Hygrometer
Visual inspection
Inspection method
Section 12-3