UPD70F3713GC-8BS-A Renesas Electronics America, UPD70F3713GC-8BS-A Datasheet - Page 182

• Manufacturer Part Number: UPD70F3713GC-8BS-A
• Description: MCU 32BIT V850ES/LX2 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Ix2r

Specifications of UPD70F3713GC-8BS-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, UART/USART
• Peripherals: LVD, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
<R>
180
(f) TMPk capture/compare register 1 (TPkCCR1)
The TPkCCR1 register is not used in the external event count mode. However, the set value of the
TPkCCR1 register is transferred to the CCR1 buffer register. When the count value of the 16-bit
counter matches the value of the CCR1 buffer register, a compare match interrupt request signal
(INTTPkCC1) is generated.
When the TPkCCR1 register is not used, it is recommended to set its value to FFFFH. Also mask the
register by the interrupt mask flag (TPkCCIC1.TPkCCMK1).
Cautions 1. Set the TPkIOC0 register to 00H.
Remarks 1. TMPk I/O control register 0 (TPkIOC0), TMPk I/O control register 1 (TPkIOC1), and TMPk
Figure 6-18. Register Setting for Operation in External Event Count Mode (2/2)
2. When an external clock is used as the count clock, the external clock can be input
2. k = 0, 2
only from the TIPk0 pin. At this time, set the TPkIOC1.TPkIS1 and TPkIOC1.TPkIS0
bits to 00 (capture trigger input (TIPk0 pin): no edge detection).
option register 0 (TPkOPT0) are not used in the external event count mode.
CHAPTER 6 16-BIT TIMER/EVENT COUNTER P (TMP)
User’s Manual U17716EJ2V0UD