UPD70F3735GC-GAD-AX Renesas Electronics America, UPD70F3735GC-GAD-AX Datasheet - Page 641

• Manufacturer Part Number: UPD70F3735GC-GAD-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3735GC-GAD-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 66
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JF3-L
19.3.2 Restore
of the restored PC.
R01UH0017EJ0400 Rev.4.00
Sep 30, 2010
Recovery from maskable interrupt servicing is carried out by the RETI instruction.
When the RETI instruction is executed, the CPU performs the following processing, and transfers control to the address
<1> Loads the restored PC and PSW from EIPC and EIPSW because the PSW.EP bit is 0 and the PSW.NP bit is 0.
<2> Transfers control back to the address of the restored PC and PSW.
The processing of the RETI instruction is shown below.
Note For the ISPR register, see 19.3.6 In-service priority register (ISPR).
Caution When the EP and NP bits are changed by the LDSR instruction during maskable interrupt
Remark
servicing, in order to restore the PC and PSW correctly during recovery by the RETI
instruction, it is necessary to set the EP bit back to 0 and the NP bit back to 0 using the LDSR
instruction immediately before the RETI instruction.
The solid line shows the CPU processing flow.
1
PC
PSW
Corresponding
bit of ISPR
Restores original processing
RETI instruction
Note
Figure 19-6. RETI Instruction Processing
PSW.EP
PSW.NP
CHAPTER 19 INTERRUPT/EXCEPTION PROCESSING FUNCTION
0
0
EIPC
EIPSW
0
1
PC
PSW
FEPC
FEPSW
Page 625 of 816