HD64F3672FXV Renesas Electronics America, HD64F3672FXV Datasheet - Page 186

• Manufacturer Part Number: HD64F3672FXV
• Description: IC H8/3672 MCU FLASH 48LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3672FXV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 48-LQFP
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 12 Watchdog Timer
12.2.1
TCSRWD performs the TCSRWD and TCWD write control. TCSRWD also controls the
watchdog timer operation and indicates the operating state. TCSRWD must be rewritten by using
the MOV instruction. The bit manipulation instruction cannot be used to change the setting value.
Rev.4.00 Nov. 02, 2005 Page 160 of 304
REJ09B0143-0400
Bit Bit Name
7
6
5
4
3
2
1
B6WI
TCWE
B4WI
TCSRWE
B2WI
WDON
B0WI
Timer Control/Status Register WD (TCSRWD)
Initial Value R/W
1
0
1
0
1
0
1
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
Bit 6 Write Inhibit
The TCWE bit can be written only when the write value of
the B6WI bit is 0.
This bit is always read as 1.
Timer Counter WD Write Enable
TCWD can be written when the TCWE bit is set to 1.
When writing data to this bit, the value for bit 7 must be 0.
Bit 4 Write Inhibit
The TCSRWE bit can be written only when the write value
of the B4WI bit is 0. This bit is always read as 1.
Timer Control/Status Register WD Write Enable
The WDON and WRST bits can be written when the
TCSRWE bit is set to 1.
When writing data to this bit, the value for bit 5 must be 0.
Bit 2 Write Inhibit
This bit can be written to the WDON bit only when the
write value of the B2WI bit is 0.
This bit is always read as 1.
Watchdog Timer On
TCWD starts counting up when WDON is set to 1 and
halts when WDON is cleared to 0.
[Setting condition]
When 1 is written to the WDON bit while writing 0 to the
B2WI bit when the TCSRWE bit = 1
[Clearing conditions]
Bit 0 Write Inhibit
This bit can be written to the WRST bit only when the write
value of the B0WI bit is 0. This bit is always read as 1.
Reset by RES pin
When 0 is written to the WDON bit while writing 0 to
the B2WI when the TCSRWE bit=1