ADUC7024BSTZ62 Analog Devices Inc, ADUC7024BSTZ62 Datasheet - Page 23

• Manufacturer Part Number: ADUC7024BSTZ62
• Description: IC MCU FLASH 62K ANLG I/O 64LQFP
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7024BSTZ62

• Core Size: 16/32-Bit
• Program Memory Size: 62KB (62K x 8)
• Design Resources: Sensing Low-g Acceleration Using ADXL345 Digital Accelerometer Connected to ADuC7024 (CN0133)
• Core Processor: ARM7
• Speed: 44MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: PLA, PWM, PSM, Temp Sensor, WDT
• Number Of I /o: 30
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 10x12b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-LQFP
• Controller Family/series: (ARM7) ADUC
• No. Of I/o's: 30
• Ram Memory Size: 8KB
• Cpu Speed: 44MHz
• No. Of Timers: 4
• Digital Ic Case Style: LQFP
• Embedded Interface Type: I2C, SPI, UART
• Rohs Compliant: Yes
• Package: 64LQFP
• Device Core: ARM7TDMI
• Family Name: ADuC7xxx
• Maximum Speed: 44 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 30
• Interface Type: I2C/SPI/UART
• On-chip Adc: 10-chx12-bit
• On-chip Dac: 2-chx12-bit
• Number Of Timers: 4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Pin No.
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
0
Mnemonic
P3.6/PWM
P3.7/PWM
P1.7/SPM7/PLAO[0]
P1.6/SPM6/PLAI[6]
IOGND
IOV
P4.0/PLAO[8]
P4.1/PLAO[9]
P1.5/SPM5/PLAI[5]/IRQ3
P1.4/SPM4/PLAI[4]/IRQ2
P1.3/SPM3/PLAI[3]
P1.2/SPM2/PLAI[2]
P1.1/SPM1/PLAI[1]
P1.0/T1/SPM0/PLAI[0]
P4.2/PLAO[10]
P4.3/PLAO[11]
P4.4/PLAO[12]
P4.5/PLAO[13]
V
DAC
DACGND
AGND
AV
DACV
ADC0
ADC1
ADC2/CMP0
ADC3/CMP1
EP
REF
DD
DD
REF
DD
TRIP
SYNC
/PLAI[14]
/PLAI[15]
General-Purpose Input and Output Port 4.0/Programmable Logic Array Output Element 8.
General-Purpose Input and Output Port 4.1/Programmable Logic Array Output Element 9.
Single-Ended or Differential Analog Input 0.
Single-Ended or Differential Analog Input 1.
Single-Ended or Differential Analog Input 2/Comparator Positive Input.
Single-Ended or Differential Analog Input 3/Comparator Negative Input.
Description
General-Purpose Input and Output Port 3.6/PWM Safety Cutoff/Programmable Logic Array Input
Element 14.
General-Purpose Input and Output Port 3.7/PWM Synchronization Input and Output/
Programmable Logic Array Input Element 15.
Serial Port Multiplexed. General-Purpose Input and Output Port 1.7/UART, SPI/Programmable
Logic Array Output Element 0.
Serial Port Multiplexed. General-Purpose Input and Output Port 1.6/UART, SPI/Programmable
Logic Array Input Element 6.
Ground for GPIO (see Table 78). Typically connected to DGND.
3.3 V Supply for GPIO (see Table 78) and Input of the On-Chip Voltage Regulator.
Serial Port Multiplexed. General-Purpose Input and Output Port 1.5/UART, SPI/Programmable
Logic Array Input Element 5/External Interrupt Request 3, Active High.
Serial Port Multiplexed. General-Purpose Input and Output Port 1.4/UART, SPI/Programmable
Logic Array Input Element 4/External Interrupt Request 2, Active High.
Serial Port Multiplexed. General-Purpose Input and Output Port 1.3/UART, I2C1/Programmable
Logic Array Input Element 3.
Serial Port Multiplexed. General-Purpose Input and Output Port 1.2/UART, I2C1/Programmable
Logic Array Input Element 2.
Serial Port Multiplexed. General-Purpose Input and Output Port 1.1/UART, I2C0/Programmable Logic
Array Input Element 1.
Serial Port Multiplexed. General-Purpose Input and Output Port 1.0/Timer1 Input/UART, I2C0/
Programmable Logic Array Input Element 0.
General-Purpose Input and Output Port 4.2/Programmable Logic Array Output Element 10.
General-Purpose Input and Output Port 4.3/Programmable Logic Array Output Element 11.
General-Purpose Input and Output Port 4.4/Programmable Logic Array Output Element 12.
General-Purpose Input and Output Port 4.5/Programmable Logic Array Output Element 13.
2.5 V Internal Voltage Reference. Must be connected to a 0.47 μF capacitor when using the
internal reference.
External Voltage Reference for the DACs. Range: DACGND to DACV
Ground for the DAC. Typically connected to AGND.
Analog Ground. Ground reference point for the analog circuitry.
3.3 V Analog Power.
3.3 V Power Supply for the DACs. Must be connected to AV
Exposed Paddle. The pin configuration for the ADuC7024/ADuC7025 LFCSP_VQ has an exposed
paddle that must be left unconnected.
Rev. C | Page 23 of 96
ADuC7019/20/21/22/24/25/26/27/28/29
DD
.
DD
.