TMPM364F10FG Toshiba, TMPM364F10FG Datasheet - Page 201

• Manufacturer Part Number: TMPM364F10FG
• Manufacturer: Toshiba

Specifications of TMPM364F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

8.2.9
Type
8.2.9.1
8.2.9.2
in units of bits. Besides the general-purpose port function, the port I performs the functions of the External sig-
nal interrupt, CEC input function and the operation mode setting.
nal, if PI0 is "1", the device enters single chip mode and boots from the on-chip flash memory. If PI0 is "0",
the device enters single boot mode and boots from the internal boot program. For details of single boot
mode, refer to "Flash Memory Operation".
Port I data register
Port I output control register
Port I function register 1
Port I open drain control register
Port I pull-up control register
Port I input control register
Port I (PI0 to PI1)
The port I is a general-purpose, 2-bit input/output port. For this port, inputs and outputs can be specified
While a reset signal is in "0" state, the PI0 input and pull-up are enabled. At the rising edge of the reset sig-
Reset initializes all bits of the port I as general-purpose ports with input and output disabled.
PI1 is N-ch open-drain ports independently PIOD register setting.
Port I Circuit Type
Port I register
−
7
6
−
Register name
5
−
Page 175
−
4
PIDATA
PIPUP
PIFR1
PICR
PIOD
PIIE
3
−
Base Address = 0x400C_0800
2
−
Address (Base+)
0x002C
0x0000
0x0004
0x0008
0x0028
0x0038
T15
1
TMPM364F10FG
T14
0