CV500BSC51 Omron, CV500BSC51 Datasheet - Page 16

• Manufacturer Part Number: CV500BSC51
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BSC51

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

6
6-1
6-2
6-3
EC Directives
EC Directives
Applicable Directives
Concepts
Conformance to EC Directives
1,2,3...
Note Applicable EMC (Electromagnetic Compatibility) standards are as follows:
EMC Directives
OMRON devices that comply with EC Directives also conform to the related
EMC standards so that they can be more easily built into other devices or the
overall machine. The actual products have been checked for conformity to
EMC standards (see the following note). Whether the products conform to the
standards in the system used by the customer, however, must be checked by
the customer.
EMC-related performance of the OMRON devices that comply with EC Direc-
tives will vary depending on the configuration, wiring, and other conditions of
the equipment or control panel on which the OMRON devices are installed.
The customer must, therefore, perform the final check to confirm that devices
and the overall machine conform to EMC standards.
EMS (Electromagnetic Susceptibility): EN61000-6-2
EMI (Electromagnetic Interference): EN50081-2
The CS1W-GPI01 GP-IB Interface Unit complies with EC Directives. To
ensure that the machine or device in which the Unit is used complies with EC
directives, the GP-IB Interface Unit must be installed as follows:
1. The GP-IB Interface Unit must be installed within a control panel. Use the
2. Reinforced insulation or double insulation must be used for the DC power
3. The GP-IB Interface Unit complying with EC Directives also conforms to
• EMC Directives
SA20-712 control panel manufactured by NITTO Electric Works or a simi-
lar control panel.
supplies used for the I/O power supply.
the Common Emission Standard (EN50081-2), particularly the 10-m regu-
lations. When a GP-IB Interface Unit is built into a machine, however, noise
can be generated due to the configuration of the control panel and con-
nected devices, causing the overall machine to fail to meet the Standards.
The user must confirm and take measures to ensure that the overall ma-
chine meets the Standards.
(Radiated emission: 10-m regulations)
xvii
6