PIC18F96J65-I/PT Microchip Technology, PIC18F96J65-I/PT Datasheet - Page 207

• Manufacturer Part Number: PIC18F96J65-I/PT
• Description: IC PIC MCU FLASH 48KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F96J65-I/PT

• Core Size: 8-Bit
• Program Memory Size: 96KB (48K x 16)
• Core Processor: PIC
• Speed: 41.667MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Type: FLASH
• Ram Size: 3808 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 70
• Ram Memory Size: 3.71875KB
• Cpu Speed: 41.667MHz
• No. Of Timers: 5
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3808 B
• Interface Type: Display Driver, Ethernet, EUSART, I2C, MSSP, SPI
• Maximum Clock Frequency: 41.667 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 5
• Operating Supply Voltage: 2.35 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183033, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162064 - HEADER INTFC MPLABICD2 64/80/100AC164323 - MODULE SKT FOR 100TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

17.4.9
The following steps should be taken when configuring
the ECCP1 module for PWM operation:
1.
2.
3.
4.
5.
6.
7.
© 2009 Microchip Technology Inc.
Configure the PWM pins P1A and P1B (and
P1C and P1D, if used) as inputs by setting the
corresponding TRIS bits.
Set the PWM period by loading the PR2 (PR4)
register.
Configure the ECCP1 module for the desired
PWM mode and configuration by loading the
CCP1CON register with the appropriate values:
• Select one of the available output
• Select the polarities of the PWM output
Set the PWM duty cycle by loading the CCPR1L
register and the CCP1CON<5:4> bits.
For auto-shutdown:
• Disable auto-shutdown; ECCP1ASE = 0
• Configure auto-shutdown source
• Wait for Run condition
For
dead-band delay by loading ECCP1DEL<6:0>
with the appropriate value.
If auto-shutdown operation is required, load the
ECCP1AS register:
• Select the auto-shutdown sources using the
• Select the shutdown states of the PWM
• Set the ECCP1ASE bit (ECCP1AS<7>).
configurations and direction with the
P1M1:P1M0 bits.
signals with the CCP1M3:CCP1M0 bits.
ECCP1AS2:ECCP1AS0 bits.
output pins using PSS1AC1:PSS1AC0 and
PSS1BD1:PSS1BD0 bits.
Half-Bridge
SETUP FOR PWM OPERATION
Output
mode,
set
the
PIC18F97J60 FAMILY
8.
9.
10. Enable PWM outputs after a new PWM cycle
17.4.10
Both Power-on Reset and subsequent Resets will force
all ports to Input mode and the CCPx/ECCPx registers
to their Reset states.
This forces the Enhanced CCPx modules to reset to a
state compatible with the standard CCPx modules.
If auto-restart operation is required, set the
P1RSEN bit (ECCP1DEL<7>).
Configure and start TMR2 (TMR4):
• Clear the TMRx interrupt flag bit by clearing
• Set the TMRx prescale value by loading the
• Enable Timer2 (or Timer4) by setting the
has started:
• Wait until TMR2 (TMR4) overflows (TMRxIF
• Enable the ECCP1/P1A, P1B, P1C and/or
• Clear the ECCP1ASE bit (ECCP1AS<7>).
the TMRxIF bit (PIR1<1> for Timer2 or
PIR3<3> for Timer4).
TxCKPS bits (T2CON<1:0> for Timer2 or
T4CON<1:0> for Timer4).
TMRxON bit (T2CON<2> for Timer2 or
T4CON<2> for Timer4).
bit is set).
P1D pin outputs by clearing the respective
TRIS bits.
EFFECTS OF A RESET
DS39762E-page 207