5.07.01 FLASHER ARM Segger Microcontroller Systems, 5.07.01 FLASHER ARM Datasheet - Page 33

• Manufacturer Part Number: 5.07.01 FLASHER ARM
• Description: PROGRAMMER JTAG FOR ARM CORES
• Manufacturer: Segger Microcontroller Systems
• Type: In-System Programmerr

Specifications of 5.07.01 FLASHER ARM

• Contents: Programmer
• For Use With/related Products: ARM7, ARM9, Cortex
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 899-1002

33
#AUTO NOINFO
This command may be used instead of #AUTO, if no status messages from Flasher
should be sent during execution. The NOINFO extension is also available for all other
commands.
The command ends with #OK or #ERRxxx
#ERASE
This command can be sent to erase all selected target flash sectors.
Flasher will reply the following sequence of messages:
#ACK
#STATUS:INITIALIZING
#STATUS:CONNECTING
#STATUS:UNLOCKING
#STATUS:ERASING
#OK (Total 0.893s, Erase 0.483s)
#START
This command can be sent to release Flasher’s target interface. All signals from
Flasher to target will be set into high-Z mode, reset of target will be released. It may
be used to start target application program.
Flasher will reply with the following sequence of messages:
#ACK
#STATUS:INITIALIZING
#STATUS:CONNECTING
#OK (Total 1.148s)
#STATUS
This command can be sent any time, even during other command execution. Flasher
responds with its current state. All defined state messages are described under Reply
from Flasher ARM on page 36.
#PROGRAM
This command can be used instead of #AUTO to program a target without erasing the
target before programming and without performing a final verification.
#VERIFY
This command can used to verify the target Flash content against the data stored in
Flasher.
#RESULT
This command can be sent any time, even during other command execution. Flasher
responds with the last result of the previously executed command.
#CANCEL
This command can be sent to abort a running program. It may take a while until the
current program is actually canceled.
Flasher will respond with:
#ERR007:CANCELED.
Flasher ARM (UM08007)
© 2004-2009 SEGGER Microcontroller GmbH & Co. KG