5.07.01 FLASHER ARM Segger Microcontroller Systems, 5.07.01 FLASHER ARM Datasheet - Page 17

• Manufacturer Part Number: 5.07.01 FLASHER ARM
• Description: PROGRAMMER JTAG FOR ARM CORES
• Manufacturer: Segger Microcontroller Systems
• Type: In-System Programmerr

Specifications of 5.07.01 FLASHER ARM

• Contents: Programmer
• For Use With/related Products: ARM7, ARM9, Cortex
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 899-1002

2.1.2
2.1.2.1 LED status indicators
Flasher ARM (UM08007)
After the download, you should see in the J-Flash Log window that the Flasher.cfg
and the Flasher.dat files have been successfully downloaded.
From now on, Flasher ARM can be used in "stand-alone mode" for stand-alone pro-
gramming.
In order to use Flasher ARM in "stand-alone mode", it has to be configured first, as
described in Setting up Flasher ARM for stand-alone mode on page 14. To boot
Flasher ARM in the "stand-alone mode", only the power supply to Flasher ARM has to
be enabled (Flasher ARM should not be connected to a PC). In the "stand-alone
mode" Flasher ARM can be used as a stand-alone flash programmer.
Note:
order to program another target device, you have to repeat the steps described in
Setting up Flasher ARM for stand-alone mode on page 14.
Progress and result of an operation is indicated by Flasher ARM’s LEDs:
Table 2.1: Flasher ARM LEDs
GREEN, high frequency flashing (10 kHz)
GREEN, after programming operation has
been started
Stand-alone mode
Flasher ARM can only program the target device it was configured for. In
Status of LED
© 2004-2009 SEGGER Microcontroller GmbH & Co. KG
Enumerating Flasher ARM. This only hap-
pens before the first programming opera-
tion is performed.
Connect to target and perform init
sequence.
Meaning
17