5.07.01 FLASHER ARM Segger Microcontroller Systems, 5.07.01 FLASHER ARM Datasheet - Page 10

• Manufacturer Part Number: 5.07.01 FLASHER ARM
• Description: PROGRAMMER JTAG FOR ARM CORES
• Manufacturer: Segger Microcontroller Systems
• Type: In-System Programmerr

Specifications of 5.07.01 FLASHER ARM

• Contents: Programmer
• For Use With/related Products: ARM7, ARM9, Cortex
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 899-1002

10
1.1
1.1.1
1.1.2
Flasher ARM (UM08007)
Flasher ARM is a programming tool for microcontrollers with on-chip or external Flash
memory and ARM core. Flasher ARM is designed for programming flash targets with
the J-Flash software or stand-alone. In addition to that Flasher ARM has all of the J-
Link functionality. For more information about J-Link please refer to the J-Link / J-
Trace User Guide which can be downloaded at http://www.segger.com.
Flasher ARM connects via USB or via RS232 interface to a PC, running Microsoft Win-
dows 2000, Windows XP, Windows 2003 or Windows Vista. Flasher ARM has a built-in
20-pin JTAG connector, which is compatible with the standard 20-pin connector
defined by ARM.
•
•
•
•
•
•
•
•
•
•
•
General
Flasher ARM can be operated from a PC with an appropriate software like J-Flash or
in stand-alone mode.
Host System
IBM PC/AT or compatible. CPU: 486 (or better) with at least 182MB of RAM, running
Microsoft Windows 2000, Windows XP, Windows 2003 or Windows Vista. It needs to
have an USB or RS232 interface available for communication with Flasher ARM.
Power supply
Flasher requires 5V DC, min. 100mA via USB connector. If USB is not connected, the
USB connector is used to power the device. Supply voltage is the same in this case.
Please avoid excess voltage.
Installing Flasher ARM PC-software J-Flash
The latest version of the J-Flash software, which is part of the J-Link software and
documentation package, can be downloaded from our website: http://www.seg-
ger.com. For more information about using J-Flash please refer to the J-Flash User
Guide which is also available for download on our website.
Flasher ARM overview
Three boot modes: J-Link mode, stand-alone mode, MSD mode
Stand-alone JTAG programmer (Once set up, Flasher can be controlled without
the use of PC program)
No power supply required, powered through USB
Support for ARM7/ARM9/Cortex-M3
Supports internal and external flash devices
64 MB memory for storage of target program
Can be used as J-Link (JTAG emulator) with a download speed of up to 720
Kbytes/second
Programming speed between 30-300 Kbytes/second depending on target hard-
ware
Serial in target programming supported
Data files can updated via J-Flash
Target interface: JTAG/SWD
Features of Flasher ARM
Working environment
CHAPTER 1
© 2004-2009 SEGGER Microcontroller GmbH & Co. KG
Introduction