ATMEGA163 ATMEL [ATMEL Corporation], ATMEGA163 Datasheet - Page 105

• Manufacturer Part Number: ATMEGA163
• Description: 8-bit Microcontroller with 16K Bytes In-System Programmable Flash
• Manufacturer: ATMEL [ATMEL Corporation]

Analog to Digital
Converter
Feature List
1142E–AVR–02/03
•
•
•
•
•
•
•
•
•
•
•
•
•
The ATmega163 features a 10-bit successive approximation ADC. The ADC is con-
nected to an 8-channel Analog Multiplexer which allows each pin of Port A to be used as
input for the ADC.
The ADC contains a Sample and Hold Amplifier which ensures that the input voltage to
the ADC is held at a constant level during conversion. A block diagram of the ADC is
shown in Figure 57.
The ADC has two separate analog supply voltage pins, AVCC and AGND. AGND must
be connected to GND, and the voltage on AVCC must not differ more than ±0.3V from
V
pins.
Internal reference voltages of nominally 2.56V or AVCC are provided On-chip. The
2.56V reference may be externally decoupled at the AREF pin by a capacitor for better
noise perfomance. See “Internal Voltage Reference” on page 29 for a description of the
internal voltage reference.
CC
10-bit Resolution
0.5 LSB Integral Non-linearity
±2 LSB Absolute Accuracy
65 - 260 µs Conversion Time
Up to 15 kSPS at Maximum Resolution
Up to 76 kSPS at 8-bit Resolution
Eight Multiplexed Single Ended Input Channels
Optional Left Adjustment for ADC Result Readout
0 - V
Selectable 2.56V ADC Reference Voltage
Free Run or Single Conversion Mode
Interrupt on ADC Conversion Complete
Sleep Mode Noise Canceler
. See the paragraph ADC Noise Canceling Techniques on how to connect these
CC
ADC Input Voltage Range
ATmega163(L)
105