AD9992_07 AD [Analog Devices], AD9992_07 Datasheet - Page 79

• Manufacturer Part Number: AD9992_07
• Description: 12-Bit CCD Signal Processor with Precision Timing Generator
• Manufacturer: AD [Analog Devices]

Address
0x36
0x37
0x38
0x39
Table 35. Test Registers—Do Not Access
Address
0x3E to 0x4F
Table 36. Test Registers—Do Not Access
Address
0x50 to 0x6F
Table 37. Shutter and GPO Registers
Address
0x70
Data Bits
[6:4]
[10:8]
[14:12]
[18:16]
[22:20]
[2:0]
[6:4]
[10:8]
[14:12]
[5:0]
[11:6]
[17:12]
[5:0]
[11:6]
[12]
[14:13]
[15]
[2:0]
Data Bits
Data Bits
Data Bits
[2:0]
[5:3]
Default
Value
1
1
1
1
1
1
1
1
1
0
20
10
0
20
0
0
0
7
Default
Value
Default
Value
Default
Value
0
0
Update
Type
SCK
SCK
SCK
SCK
Update
Type
Update
Type
Update
Type
VD
Mnemonic
H2DRV
H3DRV
H4DRV
HLDRV
RGDRV
H5DRV
H6DRV
H7DRV
H8DRV
SHDLOC
SHPLOC
SHPWIDTH
DOUTPHASEP
DOUTPHASEN
DCLKMODE
DOUTDELAY
DCLKINV
CPHMASK
Mnemonic
Mnemonic
Mnemonic
PRIMARY_ACTION
SECOND_ACTION
Rev. C | Page 79 of 92
H3 drive strength (same range as H1DRV).
H4 drive strength (same range as H1DRV).
RG drive strength (same range as H1DRV).
H7 drive strength (same range as H1DRV).
H8 drive strength (same range as H1DRV).
SHD sampling edge location.
SHP sampling edge location.
SHP width (controls input dc restore switch active time).
Description
H2 drive strength (same range as H1DRV).
HL drive strength (same range as H1DRV).
H5 drive strength (same range as H1DRV).
H6 drive strength (same range as H1DRV).
DOUT phase control, positive edge. Specifies location of
DOUT.
DOUT phase control, negative edge. Always set to
DOUTPHASEP plus 32 edges to maintain 50% duty cycle of
internal DOUTPHASE clocking.
DCLK mode. 0: DCLK tracks DOUT; 1: DCLK phase is fixed.
Data output delay (t
0: No delay.
1: ~3 ns.
2: ~6 ns.
3: ~9 ns.
Invert DCLK output:
0: No inversion.
1: Inversion of DCLK.
Enable H-masking during CP operation.
Description
Test registers only. Do not access.
Description
Test registers only. Do not access.
Description
Selects action for primary and secondary counters.
0: Idle (do nothing) autoreset on VD.
1: Activate counter (primary: auto exposure/readout).
2: RapidShot, wrap/repeat counter.
3: ShotTimer, delay start of count.
4: ShotTimer with RapidShot.
5: SLR exposure (manual).
6: SLR read (manual).
7: Force to idle.
OD
) with respect to DCLK rising edge:
AD9992