IDT82P2282 Integrated Device Technology, Inc., IDT82P2282 Datasheet - Page 83

• Manufacturer Part Number: IDT82P2282
• Description: 2 Channel T1/J1/E1 Transceiver
• Manufacturer: Integrated Device Technology, Inc.

IDT82P2282
3.20.1.2.1
sponding Interrupt Indication bit will be set. When the Interrupt Indication
Table 49: Interrupt Summary In E1 Mode
At the first bit of each FAS.
At the first bit of each Basic frame.
At the first bit of each CRC Multi-Frame.
At the first bit of each CRC Sub Multi-Frame.
At the first bit of each Signaling Multi-Frame.
In E1 mode, the interrupt is summarized in Table 49.
When there are conditions meeting the interrupt sources, the corre-
Interrupt Summary
Interrupt Sources
72
bit is ‘1’, if enabled by the corresponding Interrupt Enable bit, an inter-
rupt will be reported by the INT pin.
DUAL T1/E1/J1 LONG HAUL / SHORT HAUL TRANSCEIVER
Interrupt Indication Bit
SIGMFI
SMFI
FASI
MFI
BFI
Interrupt Enable Bit
October 7, 2003
SIGMFE
SMFE
FASE
MFE
BFE