TMP86xy12MG Toshiba, TMP86xy12MG Datasheet - Page 93

• Manufacturer Part Number: TMP86xy12MG
• Manufacturer: Toshiba

Specifications of TMP86xy12MG

• Package: SSOP30
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 16
• Ram Size: 512
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: -
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 8
• Da Converter Channels: -
• Timer Counter 18-bit Channel: IGBT
• Timer Counter 16-bit Channel: 1
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 24
• Power Supply (v): 4.5 to 5.5

9.4 Features
9.4.2.3
9.4.2.4 Trigger capture mode (CSTC = 00)
Trigger start mode
(1)
(2)
(1)
TC7 input
(Signal after
noise elimination)
TC7 input
(Signal after
noise elimination)
PPG1 output
(Example)
PPG1 output
(Example)
starts counting. The counter is cleared and stopped while the TC7 pin is driven to the specified clear/
stop level.
edges of the TC7 pin input are captured and stored in capture registers TC7CAPA and TC7CAPB,
respectively.
After a command is
set, counting does not
start until a specified
trigger appears.
After a command is
set, counting does not
start until a specified
trigger appears.
Description
If an edge specified with the start edge selection field (TRGSEL) appears on the TC7 pin, the timer
In trigger start mode, writing a 1 to TC7ST is ignored and does not initialize the PPG output.
Note: For more information on the acceptance of a trigger, see 9.4.2.5 “Trigger start/stop acceptance
Register settings
CSTC = “10”: Trigger start mode
STM: Continuous/one-time output
TC7ST = “1”: Starts waiting for a trigger on the TC7 pin
TRGSEL: Trigger selection
Description
When counting starts in command start and capture mode, the count values at the rising and falling
Figure 9-9 Example Operation in Trigger Start Mode
Command set
mode”.
Command set
Count
start
Page 82
Count
start
Count
stopped
cleared
Count
Count
start
Count
stopped
cleared
Count
Count
start
Count
stopped
cleared
Count
TMP86CH12MG