TMP86xy12MG Toshiba, TMP86xy12MG Datasheet - Page 91

• Manufacturer Part Number: TMP86xy12MG
• Manufacturer: Toshiba

Specifications of TMP86xy12MG

• Package: SSOP30
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 16
• Ram Size: 512
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: -
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 8
• Da Converter Channels: -
• Timer Counter 18-bit Channel: IGBT
• Timer Counter 16-bit Channel: 1
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 24
• Power Supply (v): 4.5 to 5.5

9.4 Features
9.4.2 Starting a count
9.4.2.1
Source clock
Counter
Dead time
Pulse width
Period
Dead time
Pulse width
PPG1 output
PPG2 output
INTTC7T
INTTC7P
A count can be started by using a command or TC7 pin input.
Figure 9-6 Example Operation in PPG1/PPG2 Independent Mode:
Command start and capture mode
(1)
Command and Capture Start, Positive Logic, Continuous Output
the count has reached a specified period, the counter is cleared. The counter subsequently restarts
counting if STM specifies continuous mode; it stops counting if STM specifies one-time mode.
which it operates as specified with STM.
(Details for the capture are given in a separate section).
Description
Writing a 1 to TC7ST causes the current count to be cleared and the counter to start counting. Once
Writing a 1 to TC7ST before the count reaches a period causes the counter to be cleared, after
The count values at the rising and falling edges on the TC7 pin can be stored in capture registers
0
1
PPG1 dead time
M: Dead time
PPG2 dead time (TC7DRD)
(TC7DRA)
M
N
S
U
T
T: Dead time
M
PPG2
N:
PPG1
U:
Active duration
Pulse width
Pulse width
S:
pulse width
Period
pulse width
Period
Page 80
T
(TC7DRC)
(TC7DRE)
(TC7DRB)
Active duration
N
U
S, 0
1
M '
N '
S
T '
U '
2
TMP86CH12MG
3