ATmega128A Atmel Corporation, ATmega128A Datasheet - Page 74

• Manufacturer Part Number: ATmega128A
• Manufacturer: Atmel Corporation

Specifications of ATmega128A

• Flash (kbytes): 128 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 53
• Ext Interrupts: 8
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Uart: 2
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 4
• Eeprom (bytes): 4096
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 4
• Output Compare Channels: 8
• Input Capture Channels: 2
• Pwm Channels: 7
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

12.3.2
8151H–AVR–02/11
Alternate Functions of Port B
Table 12-4.
The Port B pins with alternate functions are shown in
Table 12-5.
Note:
The alternate pin configuration is as follows:
• OC2/OC1C, Bit 7
OC2, Output Compare Match output: The PB7 pin can serve as an external output for the
Timer/Counter2 Output Compare. The pin has to be configured as an output (DDB7 set “one”) to
serve this function. The OC2 pin is also the output pin for the PWM mode timer function.
OC1C, Output Compare Match C output: The PB7 pin can serve as an external output for the
Timer/Counter1 Output Compare C. The pin has to be configured as an output (DDB7 set (one))
to serve this function. The OC1C pin is also the output pin for the PWM mode timer function.
Signal
Name
PUOE
PUOV
DDOE
DDOV
PVOE
PVOV
DIEOE
DIEOV
DI
AIO
Port Pin
PB7
PB6
PB5
PB4
PB3
PB2
PB1
PB0
1. OC1C not applicable in ATmega103 compatibility mode.
PA3/AD3
SRE
~(WR | ADA) •
PORTA3 • PUD
SRE
WR | ADA
SRE
A3 • ADA | D3
OUTPUT • WR
0
0
D3 INPUT
–
Alternate Functions
OC2/OC1C
and PWM Output C for Timer/Counter1)
OC1B (Output Compare and PWM Output B for Timer/Counter1)
OC1A (Output Compare and PWM Output A for Timer/Counter1)
OC0 (Output Compare and PWM Output for Timer/Counter0)
MISO (SPI Bus Master Input/Slave Output)
MOSI (SPI Bus Master Output/Slave Input)
SCK (SPI Bus Serial Clock)
SS (SPI Slave Select input)
Overriding Signals for Alternate Functions in PA3:PA0
Port B Pins Alternate Functions
(1)
(Output Compare and PWM Output for Timer/Counter2 or Output Compare
PA2/AD2
SRE
~(WR | ADA) •
PORTA2 • PUD
SRE
WR | ADA
SRE
A2• ADA | D2
OUTPUT • WR
0
0
D2 INPUT
–
Table
PA1/AD1
SRE
~(WR | ADA) •
PORTA1 • PUD
SRE
WR | ADA
SRE
A1 • ADA | D1
OUTPUT • WR
0
0
D1 INPUT
–
12-5.
ATmega128A
PA0/AD0
~(WR | ADA) •
PORTA0 • PUD
SRE
WR | ADA
A0 • ADA | D0
OUTPUT • WR
0
0
D0 INPUT
–
SRE
SRE
74