LPC4350FET256,551 NXP Semiconductors, LPC4350FET256,551 Datasheet - Page 43

• Manufacturer Part Number: LPC4350FET256,551
• Description: IC MCU 32BIT 256LBGA
• Manufacturer: NXP Semiconductors
• Series: LPC43xxr

Specifications of LPC4350FET256,551

• Core Processor: ARM® Cortex™-M4/M0
• Core Size: 32-Bit Dual-Core
• Speed: 150MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, SD/MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, LCD, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 146
• Program Memory Size: -
• Program Memory Type: ROMless
• Eeprom Size: -
• Ram Size: 264K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-LBGA
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

NXP Semiconductors
Table 3.
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See
LPC4350_30_20_10
Objective data sheet
Symbol
PC_0
PC_1
PC_2
Pin description
D4
E4
F6
x
-
-
…continued
-
-
-
7
9
13
-
-
-
All information provided in this document is subject to legal disclaimers.
Rev. 2.1 — 23 September 2011
-
-
-
[6]
[3]
[3]
I; PU -
I; PU I/O USB1_ULPI_D7 — ULPI link bidirectional data line 7.
I; PU I/O USB1_ULPI_D6 — ULPI link bidirectional data line 6.
I
-
I/O ENET_RX_CLK — Ethernet Receive Clock (MII
O
-
-
I/O SD_CLK — SD/MMC card clock.
I
-
I
O
I/O GPIO6[0] — General purpose digital input/output pin.
-
I
O
-
I
O
I/O GPIO6[1] — General purpose digital input/output pin.
-
-
O
Description
R — Function reserved.
USB1_ULPI_CLK — ULPI link CLK signal. 60 MHz
clock generated by the PHY.
R — Function reserved.
interface).
LCD_DCLK — LCD panel clock.
R — Function reserved.
R — Function reserved.
ADC1_1 — ADC1, input channel 1.
R — Function reserved.
U1_RI — Ring Indicator input for UART 1.
ENET_MDC — Ethernet MIIM clock.
R — Function reserved.
T3_CAP0 — Capture input 0 of timer 3.
SD_VOLT0 — SD/MMC bus voltage select output 0.
R — Function reserved.
U1_CTS — Clear to Send input for UART 1.
ENET_TXD2 — Ethernet transmit data 2 (MII
interface).
R — Function reserved.
R — Function reserved.
SD_RST — SD/MMC reset signal for MMC4.4 card.
32-bit ARM Cortex-M4/M0 microcontroller
Table
LPC4350/30/20/10
2.
© NXP B.V. 2011. All rights reserved.
43 of 145